PROFILE
UPM's Staff Profile
YBHG. PROFESOR DR. KHALINA BINTI ABDAN
DIRECTOR
INSTITUTE OF TROPICAL FORESTRY AND FOREST PRODUCTS
khalina@upm.edu.my
PROFESSIONAL
NAME :
(Ybhg. Profesor Dr.) KHALINA BINTI ABDAN
MANAGERIAL POSITION :
DIRECTOR
ENTITY :
INSTITUTE OF TROPICAL FORESTRY AND FOREST PRODUCTS
PERMANENT POST :
PROFESSOR
ENTITY :
FACULTY OF ENGINEERING
FIELD OF SUPERVISION
AGRICULTURAL PROCESS ENGINEERING / BIOCOMPOSITE TECHNOLOGY AND DESIGN / MATERIALS ENGINEERING / MATERIALS SCIENCE / SAFETY, HEALTH AND EMERGENCY MANAGEMENT
EDUCATIONAL BACKGROUND
2005
Ph.D.
Biocomposites Technology
University Putra Malaysia
Biocomposites Technology
University Putra Malaysia
1996
Bachelor of Agricultural Engineering
University Putra Malaysia
University Putra Malaysia
WORKING EXPERIENCE
2003
Visiting Researcher
Department of Engineering and Applied Science, University of Bath, United Kingdom
Department of Engineering and Applied Science, University of Bath, United Kingdom
2000
Tutor
Department of Biological and Agricultural Engineering,
Faculty of Engineering, University Putra Malaysia
Department of Biological and Agricultural Engineering,
Faculty of Engineering, University Putra Malaysia
1996
Mechanical Design Engineer (Senior Engineer 2)
Sony Technology (M) Sdn. Bhd. Bangi Industrial Area, Bangi Selangor
Sony Technology (M) Sdn. Bhd. Bangi Industrial Area, Bangi Selangor
1996
Research Assistance
Department of Agricultural Engineering 1996 (6 months)
Universiti Pertanian Malaysia
Department of Agricultural Engineering 1996 (6 months)
Universiti Pertanian Malaysia
1994
Bachelor Degree Industrial Training
Mechanization Section,
Oil Palm Research Station, Golden Hope Plantation, Klanang, Banting Selangor
Mechanization Section,
Oil Palm Research Station, Golden Hope Plantation, Klanang, Banting Selangor
CONFERENCE / WORKSHOP / SEMINAR
2008
Dynamic Strength Behaviours of Electron Beam Radiation on Short Natural fibre Reinforced Thermoplastic Composites in 4th International Conference on Advance Engineering Wood and Hybrid Composites, University of Maine Bar Harbour USA.
Abdan K., Harun J.
Abdan K., Harun J.
2008
Electron Beam Irradiation Effects on Impact Property of Banana Pseudo-Stem (BPS) Fiber Reinforced Unplasticized Polyvinyl Chloride (UPVC) Composites in Proceedings of Postgraduate Seminar on Natural Fibre Composites 10th June 2008 KMP/KAA Meeting Room Lev
2008
A Review of the Application of Natural Fiber Composites in Automotive Industry in Proceedings of Postgraduate Seminar on Natural Fibre Composites 10th June 2008KMP/KAA Meeting Room Level 5, Faculty of Engineering Universiti Putra Malaysia
M.M.Davoodi,
M.M.Davoodi,
2008
Combined Effects of Moisture, Water Immersion and Temperature on Kenaf Fibre Reinforced Unsaturated Polyester Composites (KFRUPE) in Proceedings of Postgraduate Seminar on Natural Fibre Composites 10th June 2008KMP/KAA Meeting Room Level 5, Faculty of Eng
2008
Application of Low Pressure Compression Moulding Machine: Effect of Laminating Methods on Strength Properties Presented Poster in 2nd Penang International Conference for Young Chemist June 2008 :Bernard M. Khalina A., Rimfiel J., and Jamarie O.
2008
Study on Mechanical and Morphology Properties of Heat Insulator Laminated Hybrid Biocomposite Presented Poster in 2nd Penang International Conference for Young Chemist June 2008 :Siti Hasnah K, Jamaliah M.S. and Wan Zin W.Y.
2008
A Preliminary Study :The Strength Characterization Of Kenaf Bast Fiber Based Poly(lactic acid)(PLA) Presented Poster in 2nd Penang International Conference for Young Chemist June 2008 Maizatulnisa O. NorAzowa I, Khalina A
COMMITTEE
2008
Panel/Judge
Post Graduate Seminar on Natural Fibre Composites
Autodesk National Design Competition 2008
Post Graduate Seminar on Natural Fibre Composites
Autodesk National Design Competition 2008
2007
Technical Committee Member
Solidworks Student Design and Modelling Competition 2007
Solidworks Student Design and Modelling Competition 2007
AWARD AND ACHIEVEMENT
2007
Certificate of Excellent Service UPM 2007
2006
Certificate of Excellent Service UPM 2006
2006
Certificate of Excellent Teaching Faculty of Engineering, UPM 2006
2005
Certificate of Excellent Service UPM 2005
International Exposition of Research and Inventions of Institutions of Higher Learning
Expo Penyelidikan adan Ciptaan Institut pengajian Tinggi Antarabangsa PECIPTA August 2007
Injection Moulding of Oil Palm Fibre Polypropylene Composite.
Expo Penyelidikan adan Ciptaan Institut pengajian Tinggi Antarabangsa PECIPTA August 2007
Injection Moulding of Oil Palm Fibre Polypropylene Composite.
18 th Malaysian International Invention, Innovation and Technology Exhibition
Bronze Medal, ITEX-May 2007
Injection Moulding of Oil Palm Fibre Polypropylene Composite.
Khalina Abdan, Jalaluddin Harun, Khairul Zaman Mohd Dahlan, En Zakiria
Bronze Medal, ITEX-May 2007
Injection Moulding of Oil Palm Fibre Polypropylene Composite.
Khalina Abdan, Jalaluddin Harun, Khairul Zaman Mohd Dahlan, En Zakiria
33rd International Exhibition of Inventions,New Techniques and Products of Geneva 2005
Bronze Medal
Electron beam irradiated oil palm fibre polypropylene composite for automotive and other industrial applications
Jalaluddin Harun, Khairul
Bronze Medal
Electron beam irradiated oil palm fibre polypropylene composite for automotive and other industrial applications
Jalaluddin Harun, Khairul
Bronze Medal- UPM R&D Innovation and Invention Competition November 2007
Design and Development of Low Pressure Compress Moulding for Biocomposite
Khalina A, Bernard M., Faizal A.R. En Zakiria I.
Design and Development of Low Pressure Compress Moulding for Biocomposite
Khalina A, Bernard M., Faizal A.R. En Zakiria I.
Gold Medal- UPM R &D Innovation and Invention Competition ITMA August 2002
Fibre Reinforced plastic composite (FRPC) from oil palm fibre and polypropylene blend.
Jalaluddin H, Khairul Zaman M D, Khalina A, Md. Ali R.
Fibre Reinforced plastic composite (FRPC) from oil palm fibre and polypropylene blend.
Jalaluddin H, Khairul Zaman M D, Khalina A, Md. Ali R.
RESEARCH PROJECT
Common Fund for Commodities (CFC Grant)
Joint Collaborations INTROP, United National industrial Development organization (UNIDO)United Nation, International Bast Fibre of China, Institute of Jute Studies Group Bangladesh
Joint Collaborations INTROP, United National industrial Development organization (UNIDO)United Nation, International Bast Fibre of China, Institute of Jute Studies Group Bangladesh
Title of Research : Design And Development of Low Pressure Compression Moulding For Multi-Layered Heat Insulator Laminated Hybrid Biocomposite
Project Leader : Dr. Khalina Abdan
Source of Grant : E-science Fund 03-01-04-SF0506(MOSTI)
Project Leader : Dr. Khalina Abdan
Source of Grant : E-science Fund 03-01-04-SF0506(MOSTI)
Title of Research : Development of Kenaf Reinforced Thermoplastic Composite via Enhancement of Injection Moulding Cooling System and Fibre Orientation for Automotive Application
Project Leader : Dr. Khalina Abdan
Source of Grant : EPU-MOPICO
Project Leader : Dr. Khalina Abdan
Source of Grant : EPU-MOPICO
Title of Research : Development of Biocomposite Material from Kenaf Fibre for Industrial building System and Furniture Components
Project Leader : Dr Khalina Abdan /Prof. Madya. Dr. Jalaluddin Harun/Dr Nor Azowa Ibrahim Source of Grant : EPU-MOPICO
Project Leader : Dr Khalina Abdan /Prof. Madya. Dr. Jalaluddin Harun/Dr Nor Azowa Ibrahim Source of Grant : EPU-MOPICO
Title of Research : Further Improvement on Kenaf Pedestrian Harvester and Kenaf Seeder
Project Leader : Dr Khalina Abdan
Source of Fund/Grant : SCS machineries Sdn Bhd
Duration : 12 months (2007-2008)
Project Leader : Dr Khalina Abdan
Source of Fund/Grant : SCS machineries Sdn Bhd
Duration : 12 months (2007-2008)
PUBLICATION
2023
Chemical, thermal, mechanical and morphological properties of kenaf fiber-reinforced polyamide 6 composites
2023
Effect of reinforcement of Alkaline-treated sugar palm/bamboo/kenaf and fibreglass/ Kevlar with polyester hybrid biocomposites: mechanical, morphological, and water absorption properties
2023
Modelling carbon footprint, emission, and sequestration of kenaf cultivation and fiber processing and utilization into automotive components
2023
Fundamental study and modification of Kenaf fiber reinforced polylactic acid bio-composite for 3D printing filaments
2022
Physical, Mechanical, and Thermal Properties and Characterization of Natural Fiber Composites Reinforced Poly(Lactic Acid): Miswak (Salvadora Persica L.) Fibers
2022
Fundamental study of commercial polylactic acid and coconut fiber/polylactic acid filaments for 3D printing
2022
Thermal properties of wood flour reinforced polyamide 6 biocomposites by twin screw extrusion
2022
Mechanical performance evaluation of bamboo fibre reinforced polymer composites and its applications: a review
2021
Mechanical Performance and Applications of CNTs Reinforced Polymer Composites – A Review
2021
The Challenges and Future Perspective of Kenaf Wo-ven Reinforcement in Thermoset Polymer Composites in Malaysia: A Review
2021
A Review on Mechanical Performance of Hybrid Natural Fiber Polymer Composites for Structural Applications
2021
Importance of Interfacial Adhesion Condition on Characterization of Plant Fiber Reinforced Polymer Composites: A Review
2021
Processes and Properties of Ionic Liquid-Modified Nanofiller/Polymer Nanocomposites - A Succinct Review
2021
A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites
2021
The Effects of Unbleached and Bleached Nanocellulose on the Thermal and Flammability of Polypropylene-Reinforced Kenaf Core Hybrid Polymer Bionanocomposites
2021
Thermogravimetric analysis properties of cellulosic natural fiber polymer composites: A review on influence of chemical treatments
2021
A review on properties and application of bio-based poly (bu-tylene succinate)
2021
Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview
2021
A Concise Review on the Physicochemical Properties of Biopolymer Blends Prepared in Ionic Liquids
2020
Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites
2020
Flexural and Torsion Properties of Hybrid Sugar Palm Yarn/Carbon Fiber-Reinforced Epoxy Composites: Effect of Fiber Loading and Hybridization
2020
Characterization Study of Empty Fruit Bunch (EFB) Fibers Reinforcement in Poly(Butylene) Succinate (PBS)/Starch/Glycerol Composite Sheet
2020
Effect of Empty Fruit Brunch reinforcement in PolyButylene- Succinate/Modified Tapioca Starch blend for Agricultural Mulch Films
2020
Effect Of Blend Composition On Characteristics And Performance Of Jatropha Bio-Epoxy/Epoxy Matrix In Composites With Carbon Fiber Reinforcement
2019
Effect of modified tapioca starch on mechanical, thermal and morphological properties of PBS blends for food packaging
2019
The effect of different linear robot travel speed on mass flowrate of pineapple leaf fibre (PALF) automated spray up composite
2019
Effect of Fiber Orientation and Fiber Loading On the Mechanical and Thermal Properties of Sugar Palm Yarn Fiber Reinforced Unsaturated Polyester Resin Composites
2019
Automated Spray Up Process For Pineapple Leaf Fibre Hybrid Biocomposites
2019
Thermal properties of treated sugar palm yarn/glass fiber reinforced unsaturated polyester hybrid composites
2019
Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment
2019
Thermal and flammability properties of kenaf/recycled carbon filled with cardanol hybrid composites
2019
Mechanical Characteristics of Green Composites of Short Kenaf Bast Fiber Reinforced in Cardanol
2019
The e?ect of di?erent linear robot travel speed on mass ?owrate ofpineapple leaf ?bre (PALF) automated spray up composite
2018
Effect of Modified Tapioca Starch on Mechanical, Thermal, and Morphological Properties of PBS Blends for Food Packaging
2018
The Effects of Alkali Treatment on the Mechanical and Chemical Properties of Banana Fibre and Adhesion to Epoxy Resin.
2018
The Effect of Silane Treated Fibre Loading on Mechanical Properties of Pineapple Leaf/Kenaf Fibre Filler Phenolic Composites
2018
The Effect of Alkaline Treatment on the Mechanical Properties of Treated Sugar Palm Yarn Fibre Reinforced Unsaturated Polyester Composites Reinforced with Different Fibre Loadings of Sugar Palm Fibre
2018
Effect of Hybridization on the Mechanical Properties of Pineapple Leaf Fiber/Kenaf Phenolic Hybrid Composites
2017
Characterization, morphology, and biodegradation of bioplastic fertilizer (BpF) composites made of poly(Butylene succinate) blended with oil palm biomass and fertilizer
2017
Curing behaviour of unsaturated polyester resin and interfacial shear stress of sugar palm fibre
2017
A review: Fibres, polymer matrices and composites
2016
Thermal, Morphological, and Biodegradability Properties of Bioplastic Fertilizer Composites Made of Oil Palm Biomass, Fertilizer, and Poly(hydroxybutyrate-co-valerate)
2016
Fatigue life estimation of kenaf reinforced composite materials by non-destructive techniques
2016
The Effects of Combined Chemical Treatments on the Mechanical Properties of Three Grades of Sisal
2016
Characterization and Biodegradation of poly( latic Acid) Blended with oil palm biomass and fertiliser for Bioplastic Fertiliser Composites
2016
Effect of Chemical Treatment on Kenaf Single Fiber and Bio-Phenolic Resin Regarding its Tensile and Interfacial Shear Stress
2015
A Review on Pineapple leaves fibre and its composites
2015
Risk Assessment of Safety and Health (RASH) for Building Constructiion
2015
Thermal and biodegradation properties of poly(lactic acid)/fertilizer/oil palm fibers blends biocomposites
2014
Effect of Potassium, Boron and Zinc on Nitrogen Content in Bast and Core Fibres for Two Kenaf Varieties (Hibiscus cannabinus L.)
2013
Aspect of Fatigue Analysis of Composite Materials: A Review
2012
Detection of defects of Kenaf/Epoxy by Thermography Analyses
2012
A Study of Fatigue Life of Kenaf Fibre Composites
2012
Detection of Defects in Kenaf/Epoxy using Infrared Thermal Imaging Technique
2012
Detection of defects in natural composite materials using a thermal imaging technique
2011
Development of Biocomposite Wall Cladding from Kenaf Fibre by Extrusion Molding Process
2011
Kenaf Nanofiber/Polylactic Asid (PLA) Nanocomposite
2011
Rheological Behaviour of Polypropylene/Kenaf Fibre Composite: Effect of Fibre Size
2011
Water Retention in Kenaf/Polypropylene Composites Due to Repeated Immersion and Drying Conditions
2008
Rheological Behaviour of Injection Moulded Oil Palm Empty Fruit Bunch Fibre ? Polypropylene Composites:Effects of Electron Beam Processing Versus Maleated Polypropylene