PROFILE
UPM's Staff Profile
YBHG. PROFESOR DR. CHUAH TEONG GUAN @ LUQMAN CHUAH BIN ABDULLAH
PROFESSOR
FACULTY OF ENGINEERING
chuah@upm.edu.my
PROFESSIONAL
NAME :
(Ybhg. Profesor Dr.) CHUAH TEONG GUAN @ LUQMAN CHUAH BIN ABDULLAH
POST :
PROFESSOR
ENTITY :
FACULTY OF ENGINEERING
FIELD OF SUPERVISION
BIOCOMPOSITE TECHNOLOGY AND DESIGN / BIOPOLYMER, PULP AND PAPER TECHNOLOGY / CHEMICAL ENGINEERING / ENVIRONMENTAL ENGINEERING / MATERIALS ENGINEERING
EDUCATIONAL BACKGROUND
2000
PhD in Chemical Engineering, University of BIrmingham, UK
1994
B Sc in Chemical Engineering, UTM
WORKING EXPERIENCE
2007
Head of Laboratory, INTROP
2006
Associate Professor, UPM
2000
Lecturer, UPM
1996
Tutor, UPM
1995
Research Assistant, UTM
1994
Production Engineer
PUBLICATION
2025
Remediation of the oil palm frond juice base medium via efficient pretreatment and dilution factor strategy for bacterial cellulose production yield enhancement
2025
Extraction Process of O-Coumaric Acid from Gliricidia Sepium Leaves: Optimization and Kinetic Studies
2025
Esterification of Kenaf Core Fiber as a Potential Adsorbent for Oil Removal from Palm Oil Mill Effluent (POME)
2025
Additive Manufacturing via Direct Ink Writing of Customized Silicone Foam with Glycerol as Dispersed Phase for Diverse Applications
2025
Toward Eco-Friendly Fertilizers: Modulating Nutrient Release From Biopolyurethane Coatings by Adjusting Isocyanate Index and Polyol Percentage
2025
Enhancement of dicoumarol production by Aspergillus fumigatus using methanolic extract of Gliricidia sepium leaves: Insights into fermentation kinetics parameters
2024
Lignin content analysis in oil palm frond juice base medium: effect on bacterial cellulose production by Acetobacter xylinum 0416
2024
Clamshell As Biosorbent – Fixed Bed Adsorption Evaluation Of Calcined Clamshells As Biosorbent For The Column Adsorption Of Methyl Orange Dye From Liquid Phase
2024
Insight into copper and iron ion sequestration from liquid-phase environment by microcrystalline cellulose biosorbent: Experimental and modelling analyses
2024
Characteristics of air pollution variation and potential source contributions of typical megacities in the Sichuan Basin, Southwest China
2024
The efficiency of polyaluminum chloride and anionic polyacrylamide in removing the hot rolling steel factory effluent turbidity
2024
Variation characteristics and coordinated emission reduction of air pollutants in megacity of Chengdu-Chongqing economic circle under dual carbon goal
2024
Spatial variation, multi-meteorological factors and potential source analysis of air pollutants in Chengdu megacity of Chengdu-Chongqing economic circle
2023
Preparation and effect of methyl oleate-based polyol on the properties of rigid polyurethane foams as potential thermal insulation material
2023
Synthesis and Characterization UV-Curable Waterborne Polyurethane Acrylate/Al2O3 Nanocomposite Coatings Derived from Jatropha Oil Polyol
2023
Long?Term Air Pollution Characteristics and Multi?scale Meteorological Factor Variability Analysis of Mega?mountain Cities in the Chengdu?Chongqing Economic Circle
2023
Long-Term Spatiotemporal Evolution and Coordinated Control of Air Pollutants in a typical mega-mountain city of Cheng-Yu Region under the “Dual Carbon” Goal
2023
Radiation-induced grafting of glycidyl methacrylate onto natural cotton fibers and trimethylamine modification for p-nitrophenol adsorption
2023
Editorial: Developing medicinal plant extracts commercially: The importance of extraction and fractionation
2023
Rheological behavior of recycled poly(ethylene terephthalate) /poly(amide) 11 blends with chain extender
2023
The flow behavior of powder stearin-based methyl ester sulfonates and the effect of glidant.
2023
Effective sequestration of levofloxacin from wastewater by biochar-supported manganese dioxide composite: Experimental study and modelling analyses
2022
Synthesis of Jatropha-Oil-Based Polyester Polyol as Sustainable Biobased Material for Waterborne Polyurethane Dispersion
2022
A Review on Natural Fiber Reinforced Polymer Composites (NFRPC) for Sustainable Industrial Applications
2022
Production and characterization of bacterial cellulose nanofiber by Acetobacter xylinum 0416 using only oil palm frond juice as fermentation medium
2022
Observation of ionic conductivity on PUA?TBAI?I2 gel polymer electrolyte
2022
Solid-Phase Extraction and Characterization of Quercetrin-Rich Fraction from Melastoma malabathricum Leaves
2022
Influence of drying method on the crystal structure and thermal property of oil palm frond juice-based bacterial cellulose
2021
Enhancing Recovery of Bioactive compounds from Cosmos caudatus leaves via Ultrasonic Extraction
2021
Jatropha Oil as a Substituent for Palm Oil in Biobased Polyurethane
2021
Effect of Cellulose Nanofibrils on the Properties of Jatropha Oil-Based Waterborne Polyurethane Nanocomposite Film
2021
Structural and Rheological Properties of Nonedible Vegetable Oil-Based Resin
2021
Trimethylamine Functionalized Radiation-Induced Grafted Polyamide 6 Fibers for p-Nitrophenol Adsorption
2021
Potential for Natural Fiber Reinforcement in PLA Polymer Filaments for Fused Deposition Modeling (FDM) Additive Manufacturing: A Review
2021
Insight on the properties of thermoplastic elastomer-based of natural rubber and recycled rubber post-treated with electron beam irradiation
2021
Optimisation of epoxide ring-opening reaction for the synthesis of bio-polyol from palm oil derivative using response surface methodology
2020
Electrocatalytic activity of starch/Fe3O4/zeolite bionanocomposite for oxygen reduction reaction
2020
Potential of oil palm empty fruit bunch resources in nanocellulose hydrogel production for versatile applications: A review
2020
Filtration analysis and fouling mechanisms of PVDF membrane for POME treatment
2020
Removal of Methylene Blue from Aqueous Solution by Using Electrical Arc Furnace (EAF) Slag
2020
Comparative Study of Aromatic and Cycloaliphatic Isocyanate Effects on Physico-Chemical Properties of Bio-Based Polyurethane Acrylate Coatings
2020
Optimization Using Response Surface Methodology (RSM) for Biodiesel Synthesis Catalyzed by Radiation-Induced Kenaf Catalyst in Packed-Bed Reactor
2020
ULTRASONIC ASSISTED EXTRACTION (UAE) PROCESS ON THYMOL CONCENTRATION FROM PLECTRANTHUS AMBOINICUS LEAVES: KINETIC MODELLING AND OPTIMIZATION
2020
Circuit Level Modelling of Electrically Doped Adenine-Thymine Nanotube based Field Effect Transistor
2020
Low cost and efficient synthesis of magnetic iron oxide/activated sericite nanocomposites for rapid removal of methylene blue and crystal violet dyes
2020
Effect of Epoxidised Jatropha Oil and Alkaline Treatment on Thermal Properties of Kenaf Fibre Poly (lactic acid) Epoxidised Jatropha Oil Biocomposite
2020
Stability enhancement of MWCNT/water nanofluids using PVA surfactant
2020
Preparation, Characterization, Morphological and Particle Properties of Crystallized Palm-Based Methyl Ester Sulphonates (MES) Powder
2019
Cationic surfactants for demulsification of produced water from alkaline-surfactant-polymer flooding
2019
Solid matrices for fabrication of magnetic iron oxide nanocomposites: Synthesis, properties, and application for the adsorption of heavy metal ions and dyes
2019
Column Efficiency of Fluoride Removal Using Quaternized Palm Kernel Shell (QPKS)
2019
Palm oil-based biodiesel synthesis by radiation-induced kenaf catalyst packed in a continuous flow system
2019
Thermal and Dynamics Mechanical Analysis of Polypropylene Blown Films with Crude Palm Oil as Plasticizer
2019
Mechanical and Physical Properties of Kenaf-reinforced Poly(lactic acid) Plasticized with Epoxidized Jatropha Oil
2018
Impact of Storage Conditions on the Stability of Predominant Phenolic Constituents and Antioxidant Activity of Dried Piper betle Extracts
2018
Comparative study of the electrochemical, biomedical, and thermal properties of natural and synthetics nanomaterials
2018
Optimization of Mechanical Properties for Polyoxymethylene/Glass Fiber/Polytetrafluoroethylene Composites Using Response Surface Methodology
2018
EFFECT OF DODECYLBENZENE SULFONIC ACID DOPANT CONCENTRATIONS ON THE SYNTHESIS OF POLYANILINE
2018
Drying of Plectranthus amboinicus (lour) spreng leaves by using oven dryer
2018
Colloidal stability and rheology of jatropha oil-based waterborne polyurethane (JPU) dispersion
2018
Clinacanthus nutans Lindau: Effects of Drying Methods on the Bioactive Compounds, Colour Characteristics and Water Activity
2018
Impacts of different drying strategies on drying characteristics, the retention of bio-active ingredient and colour changes of dried Roselle
2018
A study of mechanical and morphological properties of PLA based biocomposites prepared with EJO vegetable oil based plasticiser and kenaf fibres
2018
Mechanical and physical performance of cowdung-based polypropylene biocomposites
2018
Thermal and Dynamics Mechanical Analysis of Polypropylene Blown Films with Crude Palm Oil as Plasticiser
2018
Effect of Cd and Pb Pollutions on Physiological Growth: Wavelet Neural Network (WNN) as a New Approach on Age Determination of Coenobita scaevola
2017
Fixed bed adsorption study for removing of reactive orange 16 and acid red 114 dyes from aqueous solution using Kenaf
2017
Physicochemical Properties of Jatropha Oil-Based Polyol Produced by a Two Steps Method
2017
Adsorption of Anionic Dye Using Cationic Surfactant-Modified Kenaf Core Fibers
2017
Aqueous Polyurethane Dispersion of Jatropha Oil-based Polyol Produced by a Two Step Method
2017
Facile and green preparation of magnetite/zeolite nanocomposites for energy application in a single-step procedure
2017
Biomedical and Microbiological Applications of Bio-Based Porous Materials: A Review
2017
Improved crystallinity and dynamic mechanical properties of reclaimed waste tire rubber/EVA blends under the influence of electron beam irradiation
2017
Effect of TEMPO-Oxidization and Rapid Cooling on Thermo-Structural Properties of Nanocelluloses
2017
Synthesis and comparative study of thermal, electrochemical, and cytotoxicity properties of graphene flake and sheet
2017
Sonosynthesis of Microcellulose from Kenaf Fiber: Optimization of Process Parameters
2017
Effect of ambient conditions on drying of herbs in solar greenhouse dryer with integrated heat pump
2017
Effects of Polymorph Transformation via Mercerisation on Microcrystalline Cellulose Fibres and Isolation of Nanocrystalline Cellulose Fibres
2017
Drying characteristics of Orthosiphon stamineus Benth by solar assisted heat pump drying
2017
Understanding intrinsic plasticizer in vegetable oil-based polyurethane elastomer as enhanced biomaterial
2017
Physico-chemical characterisation of epoxy acrylate resin from jatropha seed oil
2017
Improving Compatibility of Recycled Nitrile Rubber (rNBR) and Ethylene Vinyl Acetate (EVA) Blends by Electron Beam Irradiation
2017
Physico-mechanical properties of poly(lactic acid) biocomposites reinforced with cow dung
2017
Study on retention of metabolites composition in misai kucing (orthosiphon stamineus) by heat pump assisted solar drying
2017
Impacts of different drying strategies on drying characteristics, the retention of bio-active ingredient and colour changes of dried Roselle
2017
Isolation, structure elucidation, identification and quantitative analysis of 1?-acetoxychavicol (ACA) from the roots of chlorophytum boriviliuanum (safed musli)
2017
Utilization of esterified sago bark fibre waste for removal of oil from palm oil mill effluent
2017
Electrocatalytic activity of starch/Fe3O4/zeolite bionanocomposite for oxygen reduction reaction
2017
Characterization of Carbon Nanotube Nanofluid using Xanthan Gum Dispersant
2017
A facile and green synthetic approach toward fabrication starch stabilized magnetite nanoparticles
2016
Removal of Reactive Orange 16 Dye from Aqueous Solution by Using Modified Kenaf Core Fiber
2016
Comparison of different solvents on the extraction of Melastoma malabathricum leaves using Soxhlet extraction method
2016
Rheological properties of cellulose nanocrystal-embedded polymer composites: a review
2016
Core/shell structure of Ni/NiO encapsulated in carbon nanosphere coated with few- and multi-layered graphene: Synthesis, Mechanism and Application
2016
Magnetic Field Enhanced Electrocoagulation Using Iron Electrode in Removing Glyphosate from Aqueous Solution
2016
Synthesis of Different Layers of Graphene on Stainless Steel Using the CVD Method
2016
Removal of Fluoride using Quaternized Palm Kernel Shell as Adsorbents: Equilibrium Isotherms and Kinetics Studies
2016
Irradiation cross-linking of ethylene vinyl acetate/waste tire dust: Effect of multifunctional acrylates
2016
Individualization of microfibrillated celluloses from oil palm empty fruit bunch: comparative studies between acid hydrolysis and ammonium persulfate oxidation
2016
Review of Bionanocomposite Coating Films and Their Applications
2016
Tensile Properties and Thermal Stability of Gamma Irradiated Epoxidized Natural Rubber Latex with the Presence of Sensitizer
2016
STABILITY AND CHARACTERIZATION OF CNT NANOFLUIDS USING POLYVINYL ALCOHOL DISPERSANT
2016
Sythesis of Different Layers of Graphene on Stainless Steel Using CVD Method
2016
EFFECTS OF ORGANO-FLOC AS NATURAL COAGULANT ON POSTTREATMENT OF ULTRAFILTRATION MEMBRANE
2015
Waterborne polyurethane dispersions synthesized from jatropha oil
2015
Waste tire rubber in polymer blends: A review on the evolution, properties and future
2015
A Review of Natural Fiber Reinforced Poly(Vinyl Alcohol) Based Composites: Application and Opportunity
2015
Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites
2015
Overview on Application of Response Surface Methodology (RSM) in Treatment of Palm Oil Mill Effluent (POME)
2015
Optimisation of Solid Liquid Extraction of Orthosiphon stamineus Leaves using Response Surface Methodology Technique
2015
Characterization of Kenaf Fibre-Retting Wastewater
2014
Adsorption of Nickel on Electric Arc Furnace Slag: Batch and Column Studies
2014
Esterification of M. sagu bark as an adsorbent for removal of emulsified oil
2014
Mechanical and Morphological Properties of Polypropylene/Nano a-Al2O3 Composites
2014
Fuel properties and rheological behavior of biodiesel from egusi (Colocynthis citrullus L.) seed kernel oil
2014
Effect of methyl methacrylate grafted kenaf on mechanical properties of polyvinyl chloride/ethylene vinyl acetate composites
2013
Investigations of Nickel (II) removal from Aqueous Effluents using Electric arc Furnace Slag
2013
Effect of Nanosilica and Titania on Thermal Stability of Polypropylene/Oil Palm Empty Fruit Fibre Composite
2013
Removal of Ni (II) from aqueous solution by an electric arc furnace slag using artificial neural network approach
2013
Oil Removal from Aqueous State by Natural Fibrous Sorbent: An Overview
2013
Economic feasibility assessment of one and two stages dry fractionation of palm kernel oil
2013
Characteristics of Airborne Pm2.5 And Pm2.5-10 In The Urban Environment of Kuala Lumpur
2013
Development a new method for pilot scale production of high grade oil palm plywood: Effect of resin content on the mechanical properties, bonding quality and formaldehyde emission of palm plywood
2012
Artificial Neural Network Modeling of the Deposition Rate of Lactose Powder in Spray Dryers
2012
Effect of temperature and concentration on rheological properties pomelo juice concentrates
2012
Vacuum Drying Characteristics for Piper betle L. Leaves
2012
Effects of temperature and solvent concentration on the solvent crystallization of palm-based dihydroxystearic acid with isopropyl alcohol
2012
Optimization of spray drying process parameters of Piper betle L. (Sirih) leaves extract coated with maltodextrin
2012
The Effects of Varying Solvent Polarity on Extraction Yield of Orthosiphon stamineus Leaves
2012
Removal of Heavy Metals from Steel Making Waste Water by Using Electric Arc Furnace Slag
2012
Thermal properties of low-density polyethylene/ALPHAalumina nanocomposites
2012
Effects of nano a-Al2O3 fillers and dispersant on thermal and dynamic mechanical properties of polypropylene/nano a-Al2O3 composite
2012
Fixed bed column studies for the removal of manganese using electric arc furnace slag: applying response surface method
2012
Anti-inflammatory Activity of the Major Compound from Methanol Extract of Phaleria macrocarpa Leaves
2012
Antioxidant activity and phenolic content of different parts of Orthosiphon stamineus grown under different light intensities
2012
Characterization of Mechanical Properties: Low-Density Polyethylene Nanocomposite Using Nanoalumina Particle as Filler
2011
Performance of Irradiated and Crosslinked Ethylene Vinyl Acetate/Waste Tire Dust (EVA/WTD) Blend
2011
Removal of Heavy Metals from Steel Making Waste Water by Using Electric Arc Furnace Slag
2011
Solvent crystallization of palm based dihydroxystearic acid with isopropyl alcohol: effects of solvent quantity and concentration on particle size distribution, crystal habit and morphology, and resul
2011
Solid ? Liquid Extraction of Betel Leaves (Piper Betle L.)
2011
Preparation of Nano-Scale alpha-Al2O3 Powder by the Sol-Gel Method.
2011
Glyphosate Utilization as the Source of Carbon: Isolation and Identification of new Bacteria
2011
Modelling of Freezing Kinetics of Extract of Betel Leaves (Piper betle L.)
2011
Effect of stirring time on synthesis of ultra fine x-Al2O3 powder by a simple sol-gel method
2011
Nano-Alumina and Radiation Effect on the Mechanical Properties of High Density Polyethylene/Hydroxy Apatite Composite
2011
Development, characterization and commercial application of palm based dihydroxystearic acid and its derivatives: an overview
2010
Effect of Solvent Concentration and Cooling Modes on Morphological, Particle Size Distribution and Yield of Dihydroxystearic Acid (DHSA) Particles
2010
The Isolation and Amplification of Full Length cDNA of Oleosins from Oil Palm (Elaeis guineensis Jacq.).
2010
Thermal Properties Of High Density Polyethylene-Kenaf Cellulose Composites
2010
Adsorption Study of Electric Arc Furnace Slag for the Removal of Manganese from Solution.
2010
Antioxidant and anti-inflammatory activities of Extracts of betel leaves (Piper betle) from solvents with different polarities
2010
Size-controlled synthesis of nano a-alumina particles through the sol-gel method
2009
Equilibrium and Kinetic Study on Reactive Dyes Adsorption by Palm Kernel Shell-Based Activated Carbon: In Single and Binary Systems.
2009
Thermal and Dynamic Mechanical Behavior of Cellulose and Oil Palm Empty Fruit Bunch (OPEFB) Filled Polypropylene Biocomposites
2009
Habit and Morphology Study on the Oil Palm Based 9, 10-Dihydroxystearic Acid (DHSA) Crystals
2009
Drying of betel leaves (Piper betle L.): Quality and Drying Kinetics
2009
Investigating 'Egusi' (Colocynthis citrullus L.) Seed Oil as Potential Biodiesel Feedstock
2009
Effect of Mixing Conditions on the Tensile Properties Ethylene Vinyl Acetate/Waste Tire Dust (EVA/WTD) Blend
2009
Adsorption of Reactive Dyes By Palm Kernel Shell Activated Carbon: Application Of Film Surface And Film Pore Diffusion Models
2009
Mechanical Properties of a-Al2O3/PP Nano Composite
2009
Drying Models and Quality Analysis of Sun-Dried Ciku
2008
Drying kinetics, texture, colour and determination of effective diffusivities during sun drying of chempedak
2008
Drying Kinetics and Product Quality of Dried Chempedak
2008
Effects of Temperatures on Rheological Behavior of Dragon Fruit (Hylocereus sp.) juice
2008
Effect of MAPP and TMPA as compatibiizer on the mechnical properties of cellulose and oil palm fiber empty fruit bunch-polypropylene biocomposites
2008
Thermal and Dynamic Mechanical Analysis of Polyethylene Modified with Crude Palm Oil
2008
Rheological Properties of Diluted Pummelo Juice as Affected by Three Different Concentrations
2008
Comparative study of polypropylene composites reinforced with oil palm empty fruit bunch fiber and oil palm derived cellulose
2007
Particulate matter dispersion and haze occurrence potential studies at a local palm oil mill