PROFILE
Laman Web Staf UPM
YBHG. PROFESOR DR. CHUAH TEONG GUAN @ LUQMAN CHUAH BIN ABDULLAH
PROFESOR
FAKULTI KEJURUTERAAN
PROFESIONAL
NAMA :
(Ybhg. Profesor Dr.) Chuah Teong Guan @ Luqman Chuah Bin Abdullah
JAWATAN :
Profesor
ENTITI :
Fakulti Kejuruteraan
PENGALAMAN KERJA
1996
PENERBITAN
2022:
Fenton-like Degradation of Methylene Blue by Calcium Peroxide: A Kinetics Study
2022:
Influence of drying method on the crystal structure and thermal property of oil palm frond juice-based bacterial cellulose
2022:
Processing of natural fibre and method improvement for removal of endocrine-disrupting compounds
2022:
Observation of ionic conductivity on PUA‑TBAI‑I2 gel polymer electrolyte
2021:
Insights into the p-nitrophenol adsorption by amidoxime-modified poly(acrylonitrile-co-acrylic acid): characterization, kinetics, isotherm, thermodynamic, regeneration and mechanism study
2021:
Jatropha Oil as a Substituent for Palm Oil in Biobased Polyurethane
2021:
Insight on the properties of thermoplastic elastomer-based of natural rubber and recycled rubber post-treated with electron beam irradiation
2021:
Trimethylamine Functionalized Radiation-Induced Grafted Polyamide 6 Fibers for p-Nitrophenol Adsorption
2021:
Virulence of Rigidoporus microporus Isolates Causing White Root Rot Disease on Rubber Trees (Hevea brasiliensis) in Malaysia
2021:
Effect of Cellulose Nanofibrils on the Properties of Jatropha Oil-Based Waterborne Polyurethane Nanocomposite Film
2021:
Facile fabrication and characterization of kenaf core as natural biochar for the highly efficient removal of selected endocrine-disrupting compounds
2021:
Overview of Air Pollution in Typical Basin of China Under the Target of Carbon Neutrality
2021:
Recent advances in the application of cellulose derivatives for removal of contaminants from aquatic environments
2021:
Structural and Rheological Properties of Nonedible Vegetable Oil-Based Resin
2021:
In situ Formation of Zinc Oxide on Bamboo Bleached Pulp in Preparation of Antibacterial Paper: Effect of Precursors Addition
2021:
Performance of dynamic anaerobic membrane bioreactor (DAnMBR) with phase separation in treating high strength food processing wastewater
2021:
Synthesis of an Ethylenediamine-Modified Hypercrosslinked Polymer and its Preliminary Study for Antipyrine and Pamabrom Extraction
2021:
Potential for Natural Fiber Reinforcement in PLA Polymer Filaments for Fused Deposition Modeling (FDM) Additive Manufacturing: A Review
2021:
Membrane-Based Electrolysis for Hydrogen Production: A Review
2021:
Optimisation of epoxide ring-opening reaction for the synthesis of bio-polyol from palm oil derivative using response surface methodology
2021:
Enhancing Recovery of Bioactive compounds from Cosmos caudatus leaves via Ultrasonic Extraction
2021:
Rotational Piezoelectric Energy Harvesting: A Comprehensive Review on Excitation Elements, Designs, and Performances
2021:
Dynamic anaerobic membrane bioreactor (DAnMBR) with phase separation for food processing wastewater treatment at mesophilic temperature: Characterization of cake layer
2021:
Ternary Nanocomposite System Composing of Graphene Nanoplatelet, Cellulose Nanofiber and Jatropha Oil Based Waterborne Polyurethane: Characterizations, Mechanical, Thermal Properties and Conductivity
2021:
Application strategies by selective medium treated with entomopathogenic bacteria as potential biocontrol against Coptotermes curvignathus
2021:
Effect on 1‑Butyl‑3 Methylimidazolium Iodide Ionic Liquid in Nonedible Jatropha Oil-Based Polyurethane Acrylate. Tetrabutylammonium Iodide: Lithium Iodide-Based Gel Polymer Electrolyte for Dye-Sensitized Solar Cell Application
2021:
Enhanced Properties of Single-Layer Particleboard Made from Oil Palm Empty Fruit Bunch Fibre with Additional Water-Soluble Additives
2020:
Screening of native microalgae species for carbon fixation at the vicinity of Malaysian coal‑fired power plant
2020:
Preparation, Characterization, Morphological and Particle Properties of Crystallized Palm-Based Methyl Ester Sulphonates (MES) Powder
2020:
THIN-LAYER DRYING MODEL OF COSMOS CAUDATUS (C. caudatus)
2020:
Phosphoric acid doped composite proton exchange membrane for hydrogen production in mediumtemperature copper chloride electrolysis
2020:
A Short Review of Iodide Salt Usage and Properties in Dye Sensitized Solar Cell Application: Single vs Binary Salt System
2020:
Effects of nanoclay on physical and dimensional stability of Bamboo/Kenaf/nanoclay reinforced epoxy hybrid nanocomposites
2020:
Stability enhancement of MWCNT/water nanofluids using PVA surfactant
2020:
Simultaneous adsorption of malachite green and methylene blue dyes in a fixed-bed column using poly(acrylonitrile-co-acrylic acid) modified with thiourea
2020:
Character Association and Selection of Breeding Line Based on Morphophysiological Characteristics and Tensile Strength in Hibiscus cannabinus L.
2020:
Laminated Veneer Lumber from Spindleless Rotary-peeled Veneers Produced from Short Rotation, Small Hevea Plantation Logs: Effects of Lamination Process
2020:
Low cost and efficient synthesis of magnetic iron oxide/activated sericite nanocomposites for rapid removal of methylene blue and crystal violet dyes
2020:
Optimization Using Response Surface Methodology (RSM) for Biodiesel Synthesis Catalyzed by Radiation-Induced Kenaf Catalyst in Packed-Bed Reactor
2020:
Central composite design of heavy metal removal using polymer adsorbent
2020:
Optimization the Process of Chemically Modified Carbon Nanofiber Coated Monolith via Response Surface Methodology for CO2 Capture
2020:
Removal of Methylene Blue from Aqueous Solution by Using Electrical Arc Furnace (EAF) Slag
2020:
Assessment of corrosion protection and performance of bio-based polyurethane acrylate incorporated with nano zinc oxide coating
2020:
Application of feed-forward and recurrent neural network in modelling the adsorption of boron by amidoxime- modified poly(Acrylonitrile-Co-Acrylic Acid)
2020:
Filtration analysis and fouling mechanisms of PVDF membrane for POME treatment
2020:
Physico-Mechanical and Biological Durability of Citric Acid-Bonded Rubberwood Particleboard
2020:
Potential of oil palm empty fruit bunch resources in nanocellulose hydrogel production for versatile applications: A review
2020:
Effect of Epoxidised Jatropha Oil and Alkaline Treatment on Thermal Properties of Kenaf Fibre Poly (lactic acid) Epoxidised Jatropha Oil Biocomposite
2020:
Bio-Based Polymer Electrolytes for Electrochemical Devices: Insight into the Ionic Conductivity Performance
2020:
THE SYNTHESIS AND CHARACTERISATION OF POROUS AND MONODISPERSE, CHEMICALLY MODIFIED HYPERCROSSLINKED POLY(ACRYLONITRILE)-BASED TERPOLYMER AS A SORBENT FOR THE ADSORPTION OF ACIDIC PHARMACEUTICALS
2020:
Septicemia of Subterranean Termites Coptotermes curvignathus Caused by Disturbance of Bacteria Isolated from Termite Gut and Its Foraging Pathways
2020:
Electrocatalytic activity of starch/Fe3O4/zeolite bionanocomposite for oxygen reduction reaction
2020:
Non-edible oil based polyurethane acrylate with tetrabutylammonium iodide gel polymer electrolytes for dye-sensitized solar cells
2020:
Morphological, Physiochemical and Thermal Properties of Microcrystalline Cellulose (MCC) Extracted from Bamboo Fiber
2020:
Circuit Level Modelling of Electrically Doped Adenine-Thymine Nanotube based Field Effect Transistor
2020:
Influence of cellulose II polymorph nanowhiskers on bio–based nanocomposite film from Jatropha oil polyurethane
2020:
Comparative Study of Aromatic and Cycloaliphatic Isocyanate Effects on Physico-Chemical Properties of Bio-Based Polyurethane Acrylate Coatings
2020:
Preparation of Ethylene Glycol Dimethacrylate (EGDMA)-Based Terpolymer as Potential Sorbents for Pharmaceuticals Adsorption
2020:
ULTRASONIC ASSISTED EXTRACTION (UAE) PROCESS ON THYMOL CONCENTRATION FROM PLECTRANTHUS AMBOINICUS LEAVES: KINETIC MODELLING AND OPTIMIZATION
2020:
Can panax ginseng aqueous extract improve chilled and cryopreserved bull spermatozoa?
2020:
L-Ascorbic Acid and Thymoquinone Dual-Loaded Palmitoyl-Chitosan Nanoparticles: Improved Preparation Method, Encapsulation and Release Efficiency
2020:
Hypercrosslinked poly(AN-co-EGDMA-co-VBC): synthesis via suspension polymerization, characterizations, and potential to adsorb diclofenac and metformin from aqueous solution
2020:
Performance analysis of jatropha oil-based polyurethane acrylate gel polymer electrolyte for dye-sensitized solar cells