PROFILE
UPM's Staff Profile
Y. BHG. PROF. MADYA DR. SITI ASLINA BINTI HUSSAIN
PROFESOR MADYA
FAKULTI KEJURUTERAAN
aslina
BM
EN

PROFESSIONAL

NAME :
(Y. Bhg. Prof. Madya Dr.) Siti Aslina Binti Hussain
POSITION :
Profesor Madya

EDUCATIONAL BACKGROUND
2000
Imperial College of Science, Technology & Medicine, London, England
1995
University of Wales Swansea, England
1992
University Technology Malaysia, Kuala Lumpur
1987
Malacca Girls High School
1981
Datuk Palembang Primary School, Melaka
WORKING EXPERIENCE
2012
Associate Professor, Department of Chemical & Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
2008
Senior Lecturer, Department of Chemical & Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang Selangor, Malaysia
2004
Lecturer, Department of Chemical & Environmental
Engineering, Faculty of Engineering, Universiti Putra Malaysia.
2000
Demonstrator, Chemical Engineering Department, Imperial College of Science, Technology & Medicine, London, England.
2000
Tutor, Department of Chemical & Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia 43400 Serdang Selangor, Malaysia
1999
Lecturer, Chemical Engineering Department, Taylor’s College,
Cheras, Kuala Lumpur (Part-time).
1998
Lecturer, Structural Engineering, Federal Institute Technology,
Kuala Lumpur (Part-time).
1997
Lecturer, Engineering Department, Unitek College Malaysia,
Kelana Jaya, Selangor Darul Ehsan.
SKILL
Computational Fluid Dynamics (CFD)
PROJECT
Multiple-Size-Group Model in Liquid-liquid Horizontal Flows.
Computational Fluid Dynamics Studies on Dispersion of Oily Water Separation.
Fluid Evolutions in Water and Oil Dispersed Flow System.
Numerical Modeling and Simulation on Temperature Distribution of Empty Fruit Bunch Microwave Pyrolysis.
COURSE ATTENDED
2008
Kursus Pengurusan Bibliografi untuk Fasilitator, Fakulti Kejuruteraan, UPM
2006
Kursus PTK3, IOI Palm Resort, Putrajaya
2006
“Postgraduate Supervision” Course, IOI Palm Resort, Putrajaya
2005
Designing Courses for Outcomes-Based Education, Universiti Teknologi Malaysia
2005
Kursus Induksi Modul Umum dan Khusus Kumpulan Pengurusan & Professional, Bilik Seminar, Fakulti Kejuruteraan, Universiti Putra Malaysia
2002
Computational Fluid Dynamic course, Runcorn, United Kingdom
2001
Computational Fluid Dynamic course, Runcorn, United Kingdom
1999
Wastewater Treatment Plant Course, Universiti Putra Malaysia
1999
Membrane Technology Short Course, Universiti Teknologi Malaysia, Kuala Lumpur
CONFERENCE / WORKSHOP / SEMINAR
2008
A Rapid Method for Determining the Pressure Distribution of Blood Flow System in Vein using Advanced Computational Fluid Dynamics Simulation. Computational Fluid Dynamics in Chemical Reaction Engineering IV, Whistler, British Colombia, Canada, June 15-20.
2008
CFD Model for Determining Holdup Oil-Water Dispersion in Turbulent Flow, 2008 AIChE Annual Meeting, Philadelphia, USA. 16 – 21 November 2008.
2008
Pressure Drop of Vein in Blood Flow System using Advanced Computational Fluid Dynamics Simulation. 15th Regional Symposium on Chemical Engineering (RSCE) in conjunction with the 22nd Symposium of Malaysian Chemical Engineers (SOMChE). Kuala Lumpur. pg. 3
2008
Temperature Distribution of Temperature Distribution of Empty Fruit Bunch in Vertical Reactor during Heating using CFD Simulation. 15th Regional Symposium on Chemical Engineering (RSCE) in conjunction with the 22nd Symposium of Malaysian Chemical Engineer
2008
Seminar Imej dan Penampilan Profesional, Dewan Persidangan PPL, UPM
2008
Wacana Intelek Siri 9: Kepimpinan Profesional: Apa Makna Dan Anda Bagaimana?, Dewan Persidangan PPL, UPM
2008
Large Group Teaching Workshop, Kuala Lumpur
2008
Bengkel Penyediaan dan Latihan Promosi Program Siswazah (Tanpa Tesis), Port Dickson
2008
Computational Fluid Dynamics in Chemical Reaction Engineering IV, Whistler, British Colombia, Canada
2008
2008 AIChE Annual Meeting, Philadelphia, USA
2008
15th Regional Symposium on Chemical Engineering (RSCE) in conjunction with the 22nd Symposium of Malaysian Chemical Engineers (SOMChE). Kuala Lumpur
2007
Transition inter-dispersed from stratified in water-oils flows, World Engineering Congress 2007, Penang, Malaysia, 264-271.
2007
Simulation on oil-water horizontal flows: MUSIG model. World Engineering Congress 2007, Penang, Malaysia, 130-136.
2007
Comparison on Optimum Conditions of enzymatic treatment between two Malaysian Star Fruit Varieties (B11 AND B10) for Juice Clarification using Response Surface Methodology, World Engineering Congress 2007, Penang, Malaysia, 318.
2007
Improvement on Sago Flour Processing. World Engineering Congress 2007, Penang, Malaysia, 339.
2007
Review: Experimental and Simulation on Microwave Pyrolysis. Proceeding of 21st Symposium of Chemical Engineers, Universiti Putra Malaysia, 122.
2007
Bengkel Jadual Waktu Peperiksaan Akhir, Fakulti Kejuruteraan, UPM
2007
Bengkel Jadual Waktu Semester Satu 2007/2008, Fakulti Kejuruteraan, UPM
2007
Bengkel Pangkalan Data Wiley-InterScience and SciFinder Scholar, Perpustakaan Sultan Abdul Samad, UPM
2007
Bengkel WEC2007, IOI Palm Resort, Putrajaya
2007
IChemE Membership Seminar, Kuala Lumpur
2007
3rd World Engineering Congress 2007, Penang, Malaysia
2007
Sustainabality: The Role of Chemical Engineers in Emerging Nations Seminar , Kuala Lumpur
2007
Bengkel Promosi Program Siswazah (Tanpa Tesis), IOI Marriott, Putrajaya
2007
Bengkel Penulisan Akademik, Fakulti Kejuruteraan, Fraser’s Hill
2007
Extreme Meshing and Visualization Seminar, CAD-IT Consultants, Selangor
2007
Ansys Academic Training, CAD-IT Consultants, Universiti Kebangsaan Malaysia, Selangor
2007
Pameran Reka Cipta, Penyelidikan dan Inovasi 2007, Universiti Putra Malaysia
2007
Kolokium “Publishing Science: Why, where, what, how? Tips from an Experienced Researcher”, “Maximizing Research Potential Through Academic Publishing from the Researcher’s Point of View” dan “ Building International Research Collaboration and
2007
Klinik Penulisan Antarabangsa, Universiti Putra Malaysia
2007
Bengkel Pemantapan Pengurusan Projek Penyelidikan, Fakulti Ekonomi dan Pengurusan, UPM
2007
21st Symposium of Malaysia Chemical Engineers
2006
Local Volume Fraction on Liquid-liquid Dispersion, Proceedings: The Eleventh Asian Congress of Fluid Mechanics, 434-443.
2006
Experimental Investigation of Two-Phase Local Volume Fraction using Gamma Densitometer System Technique on Liquid-liquid Dispersion, Proceedings : 11th Asian Pacific Confederation of Chemical Engineering (APCChE Congress 2006), Kuala Lumpur, Paper ID: 5
2006
Analysing Liquid Holdup for Dispersed Flow using CFD, 11th Asian Pacific Confederation of Chemical Engineering (APCChE Congress 2006), Kuala Lumpur, Paper ID: 238
2006
In-Situ Phase Fractions For Oil and Water Occupied in Pipe Channel, Seminar on Engineering and Technology (SET 2006), Kuala Lumpur, 374-382.
2006
Comparison of Energy Consumption between Recycle and Conventional Process of Flour Milling: At Break System, Seminar on Engineering and Technology (SET 2006), Kuala Lumpur, 9-17.
2006
CFD for Liquid-liquid Dispersed Flows in Horizontal Pipe, Seminar on Engineering and Technology (SET 2006), Kuala Lumpur, 208-211.
2006
Majlis Perjumpaan Y.A. B DATO’ SERI ABDULLAH HAJI BADAWI, Perdana Menteri Bersama Pensyarah Institusi Pengajian Tinggi, Dewan Perdana, Pusat Konvensyen Antarabangsa Putrajaya (PICC)
2006
Bengkel “Learning Outcomes Initiative 1 & 2 UPM”, Fakulti Ekologi, Universiti Putra Malaysia
2006
3rd Conference on Best Practices in Process Plant Management, Kuala Lumpur Convection Center
2006
The 8th International Exhibition on Laboratory Instrumentation, Equipment, Automation & Services, Kuala Lumpur Convection Center
2006
Dialog Penyeliaan Pelajar Siswazah dan Penerangan Prosedur Pengajian Siswazah Kali Ketiga, Fakulti Kejuruteraan, Universiti Putra Malaysia
2006
Seminar Modal Insan “ Ke Arah Pekerja dan Keluarga Cemerlang”, Auditorium Jurutera, Fakulti Kejuruteraan, Universiti Putra Malaysia
2006
One day seminar: “Chemical Engineers-Innovating Technologies for Sustainable Development”, Faculty of Engineering, Universiti Putra Malaysia
2006
11th Asian Pacific Confederation of Chemical Engineering, (APCChE Congress 2006) Kuala Lumpur
2006
Chemical Technology Exhibition (ChemTex 2006), Kuala Lumpur Convention Centre
2006
Seminar on Technology and Engineering (SET 2006), IOI Palm Resort, Putrajaya
2006
Research & Industry Forum 2006, Faculty of Engineering, Universiti Putra Malaysia
2006
Bengkel Penyediaan Jadual Waktu Bersepadu Semester Kedua 2006/2007, Universiti Putra Malaysia
2006
Sesi Latihan Pangkalan Data Science Direct dan Scopus, Auditorium Kejuruteraan, Fakulti Kejuruteraan
2006
Bengkel Penyeliaan dan Pengurusan Tesis Pelajar Siswazah, Bilik Seminar Fakulti Kejuruteraan
2005
Multiple-Size-Group Model in Liquid-liquid Horizontal Flows, Proceedings: 2nd International Conference on Chemical and Bioprosess Engineering (SOMCHE 2005), Kota Kinabalu, Sabah. 366-373.
2005
General Awareness MS ISO 9001:2000, Faculty of Engineering, Universiti Putra Malaysia
2005
Route to Professional Engineer, IOI Palm Garden, Putrajaya
2005
Internal Audit MS ISO 9001:2000 SIRI 1, Fakulti Kejuruteraan, Universiti Putra Malaysia
2005
Program Induksi Pegawai Fakulti Kejuruteraan Siri IV, Fakulti Kejuruteraan, Universiti Putra Malaysia
2005
The 10th Asian Oil, Gas & Petrochemical Engineering Exhibition, Kuala Lumpur Convention Centre
2005
Taklimat Analisis Maklumat & Latihan Penyediaan Rancangan Pengajaran dan Kaedah Pengisian Borang Senarai Semakan Penyediaan Kertas Soalan Peperiksaan Akhir, Universiti Putra Malaysia
2005
Bengkel OBE Jabatan Kejuruteraan Kimia & Alam Sekitar, Cyberview Lodge Resort & SPA, Cyberjaya
2005
Bengkel OBE Jabatan Kejuruteraan Kimia & Alam Sekitar (samb), Universiti Putra Malaysia
2005
Bengkel Penyediaan Jadual Waktu Bersepadu Semester Pertama 2005/2006, Universiti Putra Malaysia
2005
Bengkel Semakan Amali Jabatan Kejuruteraan Kimia dan Alam Sekitar, Universiti Putra Malaysia
2005
2nd International Conference on Chemical and Bioprosess Engineering (SOMCHE 2005), Kota Kinabalu, Sabah
2004
Bengkel Penulisan, Riviera Bay Resort, Melaka
1999
World Engineering Congress 99, Sheraton Subang Jaya, Kuala Lumpur
1995
Petroleum Engineering Seminar 1, Universiti Teknologi Malaysia, Kuala Lumpur
1995
Petroleum Engineering Seminar 2, Universiti Teknologi Malaysia, Kuala Lumpur
1995
Petroleum Engineering Seminar 3, Universiti Teknologi Malaysia, Kuala Lumpur
1992
Stress and Strength Seminar, Universiti Teknologi Malaysia, Kuala Lumpur
PAPER PRESENTED
2008
A Rapid Method for Determining the Pressure Distribution of Blood Flow System in Vein using Advanced Computational Fluid Dynamics Simulation. Computational Fluid Dynamics in Chemical Reaction Engineering IV, Whistler, British Colombia, Canada, June 15-20.
2008
CFD Model for Determining Holdup Oil-Water Dispersion in Turbulent Flow, 2008 AIChE Annual Meeting, Philadelphia, USA. 16 – 21 November 2008.
2008
Pressure Drop of Vein in Blood Flow System using Advanced Computational Fluid Dynamics Simulation. 15th Regional Symposium on Chemical Engineering (RSCE) in conjunction with the 22nd Symposium of Malaysian Chemical Engineers (SOMChE). Kuala Lumpur. pg. 3
2008
Temperature Distribution of Temperature Distribution of Empty Fruit Bunch in Vertical Reactor during Heating using CFD Simulation. 15th Regional Symposium on Chemical Engineering (RSCE) in conjunction with the 22nd Symposium of Malaysian Chemical Engineer
2007
Transition inter-dispersed from stratified in water-oils flows, World Engineering Congress 2007, Penang, Malaysia, 264-271.
2007
Simulation on oil-water horizontal flows: MUSIG model. World Engineering Congress 2007, Penang, Malaysia, 130-136.
2007
Comparison on Optimum Conditions of enzymatic treatment between two Malaysian Star Fruit Varieties (B11 AND B10) for Juice Clarification using Response Surface Methodology, World Engineering Congress 2007, Penang, Malaysia, 318.
2007
Improvement on Sago Flour Processing. World Engineering Congress 2007, Penang, Malaysia, 339.
2007
Review: Experimental and Simulation on Microwave Pyrolysis. Proceeding of 21st Symposium of Chemical Engineers, Universiti Putra Malaysia, 122.
2006
Local Volume Fraction on Liquid-liquid Dispersion, Proceedings: The Eleventh Asian Congress of Fluid Mechanics, 434-443.
2006
Experimental Investigation of Two-Phase Local Volume Fraction using Gamma Densitometer System Technique on Liquid-liquid Dispersion, Proceedings : 11th Asian Pacific Confederation of Chemical Engineering (APCChE Congress 2006), Kuala Lumpur, Paper ID: 5
2006
Analysing Liquid Holdup for Dispersed Flow using CFD, 11th Asian Pacific Confederation of Chemical Engineering (APCChE Congress 2006), Kuala Lumpur, Paper ID: 238.
2006
In-Situ Phase Fractions For Oil and Water Occupied in Pipe Channel, Seminar on Engineering and Technology (SET 2006), Kuala Lumpur, 374-382.
2006
Comparison of Energy Consumption between Recycle and Conventional Process of Flour Milling: At Break System, Seminar on Engineering and Technology (SET 2006), Kuala Lumpur, 9-17.
2006
CFD for Liquid-liquid Dispersed Flows in Horizontal Pipe, Seminar on Engineering and Technology (SET 2006), Kuala Lumpur, 208-211.
2005
Multiple-Size-Group Model in Liquid-liquid Horizontal Flows, Proceedings: 2nd International Conference on Chemical and Bioprosess Engineering (SOMCHE 2005), Kota Kinabalu, Sabah. 366-373.
TEACHING
2008
Fluid Mechanics for Chemical Engineer
2008
Bioprocess
2008
Chemical Laboratory 1
2008
Mass Transfer
2007
Fluid Mechanics for Chemical Engineer
2007
Mass Transfer
2007
Fluid Mechanics for Chemical Engineer
2006
Statistics
2005
Statistics
2005
Process Engineering
2005
Chemical Engineering Laboratory 2
2004
Chemical Process Principle
2004
Chemical Engineering Laboratory 3
Survey Project. 2004-2008
Final Year Design Project. 2004-current
COMMITTEE
2008
Member, Malaysia Society for Engineering & Technology (mSET)
2007
Member, Technical Division Engineering (IEM)
2007
Member, Alumni Imperial College London
2005
Member, Institution of Engineers Malaysia (IEM)
2005
Graduate Member, Board of Engineers Malaysia (BEM)
2004
Alumni, Imperial College London, United Kingdom
2004
Ahli, Persatuan Pegawai Akademik UPM
2004
Ahli, KSSFK UPM
1999
Associate Member, The Institution of Chemical Engineers (IChemE)
1995
Alumni, University of Swansea, Wales, United Kingdom
AWARD AND ACHIEVEMENT
2008
Best Services Year, Universiti Putra Malaysia
2008
Excellent Teaching Year, Universiti Putra Malaysia
2007
Bronze, Pameran Reka Cipta, Penyelidikan dan Inovasi
2007
Best Services Year, Universiti Putra Malaysia
2007
Excellent Teaching Year, Universiti Putra Malaysia
2006
Best Services Year, Universiti Putra Malaysia
2005
Best Services Year, Universiti Putra Malaysia
NON-JOB RELATED ACTIVITY
2008
Ahli Jawatankuasa Perpustakaan UPM
2007
Secretary World Engineering Congress (WEC), Chemical and Food Engineering Unit, UPM
2007
Ketua Bidang Pengajian dengan Tesis (Siswazah), Jabatan Kejuruteraan Kimia dan Alam Sekitar
2007
Juruaudit Keselamatan Dalaman Jabatan KKA, Fakulti Kejuruteraan, UPM
2007
Ahli Jawatankuasa EAC, Jabatan Kejuruteraan Kimia dan Alam Sekitar
2007
Ahli Jawatankuasa, 21st Symposium of Malaysia Chemical Engineers
2006
SAFETY MASTER PROGRAM-Ahli Jawatankuasa Pembentukan Program Master Keselamatan Proses & Pencegahan Kehilangan (tanpa Tesis), Jabatan Kimia dan Alam Sekitar, Fakulti Kejuruteraan, Universiti Putra Malaysia
2006
Secretariat, 10th Anniversary Seminar Chemical Engineering Department
2006
Akreditasi IChemE Jabatan Kejuruteraan Kimia dan Alam Sekitar
2005
Jawatankuasa Kaji Semula Program (JJKSP), Jabatan Kimia dan Alam Sekitar, Fakulti Kejuruteraan, Universiti Putra Malaysia
2005
Penyelaras Perhubungan Perpustakaan, Fakulti Kejuruteraan
2005
Penasihat Akademik, Jabatan Kimia dan Alam Sekitar, Fakulti Kejuruteraan, Universiti Putra Malaysia
AREA OF SPECIALISATION
Good in simulation in any chemical process area; special tools using CFD software and Mathematica codes. Good in chemical processing and technology fields.
Experienced in multiphase flow system for oil and liquid system, industry applications, microwave pyrolysis and bioengineering in medical application.
RESEARCH PROJECT
Multiple-Size-Group Model in Liquid-liquid Horizontal Flows, Skim Penyelidikan Pensyarah Lantikan Baru. 2006. (RM 10,000) - Completed.
Computational Fluid Dynamics Studies on Dispersion of Oily Water Separation, Research University Grant Scheme (RUGS) 2007. (RM29,300) – On-going.
Computational Fluid Dynamics Studies on Dispersion of Oily Water Separation, Fundamental Research Grant Scheme (FRGS) 2007.(RM100, 000.00) – On-going.
4. Fluid Evolutions in Water and Oil Dispersed Flow System, eScienceFund 2007. (RM197, 800.00) – On-going.
Numerical Modeling and Simulation on Temperature Distribution of Empty Fruit Bunch Microwave Pyrolysis, Fundamental Research Grant Scheme 2006. (RM 70,000) – On-going.
2. Development of a Theory and Enhancement of Liquid-liquid Columns for Process Industries, IRPA – On-going.

RANDOM IMAGE
725
pageview
since 22 August'19