Selamat Datang Ke
LAMAN WEB PERIBADI
Prof. Madya Ir. Dr.
Abd Rahim Abu Talib
FAKULTI KEJURUTERAAN
Laman Utama Profesional Minat & Hobi Galeri Foto Pautan Menarik
dapatkan nombor telefon dan faks saya hantar email kepada saya
PROFAIL

MAKLUMAT PERIBADI
SAPAAN : Prof. Madya Ir. Dr.
NAMA : Abd Rahim Bin Abu Talib
JAWATAN HAKIKI : Profesor Madya
PTJ : Fakulti Kejuruteraan

LATARBELAKANG PENDIDIKAN
  • 2003 : Doctor of Philosophy
    University of Oxford, United Kingdom.
  • 1998 : Bachelor (Hons.) in Aeronautical Engineering.
    University of Salford, United Kingdom.


  • PENGALAMAN KERJA
  • 2008-to date : Department of Aerospace Engineering,
    University Putra Malaysia, Selangor, Malaysia.
    Senior Lecturer.
  • 2007-to date : Department of Aerospace Engineering,
    University Putra Malaysia, Selangor, Malaysia.
    Head of Department.
  • 2003-2007 : Department of Aerospace Engineering,
    University Putra Malaysia, Selangor, Malaysia.
    Lecturer.
  • 1998-2003 : Department of Aerospace Engineering,
    University Putra Malaysia, Selangor, Malaysia
    Tutor.


  • PERKHIDMATAN PERUNDINGAN
  • Commercial Street Lamp Wind Tunnel Testing (RM7,187.50 (US$2050)), Muarlite
    Industry Sdn. Bhd., 2007. (consultant)
  • Thermal and Flow Measurements on Beachcraft B200T Aircraft, (RM 6000 (US$
    2000)), Airod (M) Sdn. Bhd., 2007 (Head consultant)
  • Street Lantern Wind Loading Test, (RM 8050 (US$2500)), Vantage Group, 2007
    (Head consultant)
  • Flow Measurements Downstream of a Propeller Fan, (RM 8050 (US$2500)), OYL
    Research & Development Centre Sdn. Bhd., 2006, (consultant)
  • Peranan PIMA Sebagai Badan Bertanggungjawab ke atas Institut Memandu di
    Malaysia, (RM6210 (US$2200)), Persatuan Institut Memandu Malaysia, 2007,
    (consultant)
  • Street Lantern Wind Tunnel Testing, (RM 8050 (US$2500)), Success Electric &
    Transformer Manufacturer Sdn. Bhd., 2008, (Head consultant)
  • Street Lantern Wind Tunnel Testing, (RM 8050 (US$2500)), PCO Lighting Sdn. Bhd.,
    2008 (consultant)


  • PERSIDANGAN / BENGKEL / SEMINAR
  • A.R Abu Talib, P.T Ireland, A.J Neely and A.J Mullender (2005) Numerical Simulation
    of a Standard Fire-Test on a Flat Plate, Proceedings, National Symposium: Aerospace
    Technologies of the XXI Century (AEROTECH), Putrajaya, Malaysia, pp. 79-88.
  • A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2001) Compact Low-
    Temperature Analogue of Aero Engine Fire-Certification Burner, Proceedings, ASME
    Turbo Expo, New Orleans, USA, 2001-GT-0364.
  • A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2003) Detailed Investigation
    of Heat Flux Measurements Made in a Standard Propane-Air Fire-Certification Burner
    Compared to Levels Derived From a Low-Temperature Analogue Burner,
    Proceeding
  • A.R Abu Talib, A.J Neely, P.T Ireland and A.J Mullender (2003) A Novel Liquid
    Crystal Image Processing Technique Using Multiple Gas Temperature Steps To
    Determine Heat Transfer Coefficient Distribution And Adiabatic Wall Temperature,
    Proceedings,
  • A.R Abu Talib, A.A Jaafar, N.A Abdul Jalil and A.S Mokhtar (2007) Flow
    Measurements Downstream Of An Axial Flow Fan Inside An Outdoor Air Conditioning
    Unit, Proceedings, FEIIC International Engineering Convention, Jeddah, Saudi Arabia,
    Intec07-07
  • B. Mohd Nasir, A.R Abu Talib, A.S Mokhtar and M.F Zainuddin (2007) The Role Of
    Engineers In Dakwah: A Malaysian Experience, Proceedings, FEIIC International
    Engineering Convention, Jeddah, Saudi Arabia, Intec07-089, pp. 689-694.
  • A. S. Mokhtar, Hakim S. Sultan, M.K. Abdullah, E. Mahdi, A.R Abu Talib and A. M. S.
    Hamouda (2007) Numerical Investigations Into The Crushing Behaviour of Conical
    Shell System, FEIIC International Engineering Convention, Jeddah, Saudi Arabia,
    Int
  • A.R Abu Talib, A.A Jaafar, A.S Mokhtar and A.H Razali (2007) Significance of Solar
    Radiation on Aircraft Engine under Cowl Temperature, Proceedings, ASME Turbo
    Expo, Montreal, Canada, GT2007-28048.
  • A.R Abu Talib, M.R Osman, A.G.L Abdullah, S. Abdul Rashid, N.K Noordin, N. Megat
    Johari, M.J Megat Mohd Noor and A.A Abang Ali (2007) A Review of France
    Professional Development for Engineers, Engineering Technologists and Technicians,
    Proceeding
  • A.R Abu Talib, M.R Osman, A.G.L Abdullah, S. Abdul Rashid, N.K Noordin, N. Megat
    Johari, M.J Megat Mohd Noor and A.A Abang Ali (2007) The Professional
    Development of Engineering Team in Germany, Proceedings, World Engineering
    Congress - Mechanica
  • A.J Neely, A.R Abu Talib, P.T Ireland and A.J Mullender (2000) Development of Low-
    Temperature Fire-Event Modeling Technique, Proceedings, International Congress of
    Aeronautical Science, Harrogate, UK.
  • A.S Mokhtar, H.S Sultan, A.R Abu Talib, N.M.A Nik Long and N. Jamaluddin (2007)
    Study on Optimization of Composite Conical Structures for Crashworthiness
    Application, Proceedings, National Symposium: Aerospace Technologies of the XXI
    Century (AER
  • Jaafar A.A., A.R. Abu Talib, Mokhtar A.S. and Sapuan S.M. (2007) Numerical
    Predictions of Flow Fields in a Model of Air Conditioning Aircraft Cabin, Proceedings,
    National Symposium: Aerospace Technologies of the XXI Century (AEROTECH),
    Putrajaya,
  • A.S Mokhtar, E. Mahdi, M.R Ajir and A.R Abu Talib (2005) Crushing and Energy
    Abrosption Behaviour of Axially Loaded Natural Composite Tubes, Proceedings,
    National Symposium: Aerospace Technologies of the XXI Century (AEROTECH),
    Putrajaya, Malaysi
  • A.A Jaafar, A.R Abu Talib, X. Gan, M. Wilson and J.M Owen (2005) Flow in a
    Rotating Cavity with Peripheral Flows, Proceedings, National Symposium: Aerospace
    Technologies of the XXI Century (AEROTECH), Putrajaya, Malaysia, pp. 115-119.
  • A.A Jaafar, A.R Abu Talib, A.S Mokhtar, I Abd.Rahim, P.R Arora and M.M.H Megat
    Ahmad (2005) Combined Experimental and Numerical Investigation on a Film Cooling
    Flow over a Flat Surface, Proceedings, National Conference on Advances in
    Mechanical E
  • G. Goudah, E. Mahdi, A.R. Abu Talib, A.S. Mokhtar and R. Yunus (2006) Automobile
    Compression Composite Elliptic Spring, Proceedings, FEIIC Seminar on Engineering
    and Technology, Palm Garden Hotel, Putrajaya, Malaysia, pp. 242-248.
  • M.A. Badie, E. Mahdi, A.R. Abu Talib, E.J. Abdullah and R. Yunus (2006) Design and
    Analysis of a Hybrid Composite Drive Shaft for Automotive Applications, Proceedings,
    FEIIC Seminar on Engineering and Technology, Palm Garden Hotel, Putrajaya,
    Mal
  • A.A. Jaafar, A.R. Abu Talib, I. Abdul Rahim, M.N. Fillipski and S.M. Sapuan (2006)
    Development of a Testing Facility for Modelling Cooling Technique, Proceedings,
    FEIIC Seminar on Engineering and Technology, Palm Garden Hotel, Putrajaya,
    Malaysia
  • A.R Abu Talib, A.A Jaafar, A.S Mokhtar, I. Abd. Rahim and M.S Abdul Karim (2006)
    Effects of Blowing Ratio on the Heat Transfer Coefficient Distribution Downstream of a
    Single Film Cooling Hole, Proceedings, FEIIC Seminar on Engineering and
    Techno
  • M.K Abdullah, A.R Abu Talib, N.R Mohd Suradi, A.S Mokhtar, N. Jamaluddin and M.F
    Zainuddin (2006) K-Chart: Research Planning and Monitoring Tool for Engineering
    and Technology Applications, Proceedings, FEIIC Seminar on Engineering and
    Technology
  • N. Abdullah, A.R. Abu Talib, A.A. Jaafar, H.R. Mohd Saiah and M.A. Mohd Salleh
    (2007) Development of a Graphical User Interface (GUI) For Processing Images in
    Thermochromic Liquid Crystal Calibration, Proceedings, National Symposium:
    Aerospace Te
  • M.A Azlan, M.F Mohideen Batcha and A.R Abu Talib (2007) Design of a CVT
    Lubricant Test Device Apparatus, Proceedings, Conference on Applications and
    Design in Mechanical Engineering, Kangar, Perlis, Malaysia.


  • ANUGERAH DAN PENCAPAIAN
  • Edgel Sheppe Award, Exeter College, University of Oxford, 2001.
  • Excellent Service Award, UPM, 2004
  • Excellent Service Award, UPM, 2005
  • Excellent Service Award, UPM, 2006
  • Best Paper Student Award, National Symposium: Aerospace Technologies of the XXI
    Century (AEROTECH), Putrajaya, Malaysia, 2007.
  • A.R. Abu Talib, N. Abdullah, A.A Jaafar, A.S Mokhtar and E. Mahdi, “Thermochromic
    Liquid Crystal Technique for Heat Transfer Measurements” Research Innovation and
    Commercialization Exhibition, Faculty of Engineering, University Putra Malaysia,
  • E.Mahdi, G. Goudah, M. Shahizam, A. S. Mokhtar and A. R. Abu Talib, “Composite
    semi-elliptic suspension spring”, Research Innovation and Commercialization
    Exhibition, Faculty of Engineering, University Putra Malaysia, Malaysia, 2006.
    (Bronze)
  • M.J Megat Mohd Noor, M.R Osman, R. Wagiran, A.R. Abu Talib dan S.Abdul Rashid.
    “Sistem Pengurusan Kualiti – Putra 3Q”, Pertandingan Konvensyen Kumpulan
    Meningkat Mutu Kerja (KMK), Negeri Selangor, 2006. (Saguhati)


  • KEGIATAN LUAR BIDANG TUGAS
  • Scientific Reviewer:Journal of Flow Measurement and Instrumentation, ELSEVIER, UK.
  • Invited speaker, Workshop on K-Chart: A Tool for Research Planning and Monitoring,
    BMI-UniKL, Malaysia (2-3 July 2007).
  • Treasurer, National Aerotech Seminar II, Putrajaya, 2007.
  • Pengerusi, Jemaah Dekan/Ketua Program dan Ketua Jabatan Bidang Aeroangkasa
    IPTA (Nov 2007 to date)
  • Member, Jawatankuasa Halatuju Kejuruteraan Aeroangkasa, Kementerian Pengajian
    Tinggi (Nov 2007 to date).
  • Invited Speaker, Workshop on Youth for Space, ANGKASA, ILKAP, Bandar Baru
    Bangi, Malaysia (2007)
  • Ahli Panel Bidang Kejuruteraan Rekabentuk ‘National Science Foundation’,
    Kementerian Sains, Teknologi dan Inovasi, (2007 to date)
  • Secretary, FEIIC International Engineering Conference (IntEC), Riyadh, Saudi Arabia
    10-14 Mac 2007.
  • Secretariat, Federation of Engineering Institution in Islamic Countries (FEIIC), Kuala
    Lumpur Regional Office, (November 2005 – hingga kini)
  • Treasurer, World Engineering Congress, Penang, August 2007.
  • Invited speaker, Workshop on K-Chart: A Tool for Research Planning and Monitoring,
    Residence Hotel, UniTEN, Malaysia (22 February 2007).
  • Quality Committee, Board of Engineers Malaysia, (2007 – to date)
  • Scientific Reviewer:International Journal of Engineering and Technology, FEIIC.
  • Penyelaras Audit Dalaman, Unit Jaminan Kualiti (23 Nov 2004 hingga kini)
  • Ahli, Jawatankuasa Pembangunan Fakulti (Disember 2005 – hingga Oktober 2007)
  • Ahli, Jawatankuasa Surau Fakulti Kejuruteraan (hingga kini)
  • Ketua Juruaudit, Audit Dalaman Fakulti Kejuruteraan, UPM 1/2007
  • Penceramah, Taklimat Audit Dalaman dan Pengharmonian Audit Dalaman Fakulti
    Kejuruteraan, UPM 1/2007
  • Penceramah, Latihan General Awareness MS ISO 9001:2000 Siri I, (2007)
  • Ahli, Jawatankuasa Persediaan Hari Q 2006
  • Ahli, Jawatankuasa Tindakan Pencegahan Fakulti
  • Pengerusi Majlis Pembentangan Ucap tama, 2nd International Engineering
    Convention 2007 (IntEC2007) Jeddah, Saudi Arabia (10-14 March).


  • BIDANG PENGKHUSUSAN
  • GAS TURBINE HEAT TRANSFER and
    PROPULSION


  • PROJEK PENYELIDIKAN
  • The Significance of Solar Radiation on Under Cowl Temperature Skim Penyelidikan
    Pensyarah Lantikan Baru, UPM, RM10,000 (US$3250), 2005-2006, (head)
  • Advancement of Thermochromic Liquid Crystal Technique in Experimental Heat
    Transfer Testing on Aero Engine Components, Sciencefund, MOSTI, Project no. 04-
    01-04-SF0601, RM 115,996 (US$35,000), 2006-2008, (head)
  • Experimental Investigation on the Hysteresis in Thermochromic Liquid Crystal for Heat
    Transfer Testing, Fundamental Research Grant. Scheme, MoHE. Project no. 01-01-
    07-032FR, RM106,493 (US$30,000), 2006-2008, (head)
  • Adopting Eddy Viscosity Hyphothesis in the Development of a Specific-Purpose
    Computer Code Fundamental Research Grant Scheme, MoHE., Project no. 02-01-07-
    046FR, RM80,000 (US$26,000), 2006-2009, (member)
  • Fundamental study of Vacuum Cooling Technique for Non-Porous Materials,
    Fundamental Research Grant Scheme, MoHE. RM105,000 (US$30,000), (member)






  • 5811 HITS
    sejak 31 Mac'08



    1.03
    © UNIVERSITI PUTRA MALAYSIA, 2008
    template oleh zuraya