PROFAIL

MAKLUMAT PERIBADI
SAPAAN : Y. Bhg. Profesor Dr.
NAMA : Paridah Binti Md Tahir
JAWATAN HAKIKI : Profesor
PTJ : Fakulti Perhutanan



PENERBITAN (KMPORTAL)
Effect of Kenaf Parts on the Performance of Single-Layer and Three-Layer Particleboard Made from Kenaf and Rubberwood 2014
Effects of the Improvement in Thermal Conductivity Coefficient by Nano-Wollastonite on Physical and Mechanical Properties in Medium-Density Fiberboard (MDF) 2014
Effect of Oil Palm and Jute Fiber Treatment on Mechanical Performance of Epoxy Hybrid Composites 2014
Biodegradable starch-based composites: effect of micro and nanoreinforcements on composite properties 2014
Medium Density Fiberboard Made from Kenaf (Hibiscus cannabinus L.) Stem: Effect of Thermo-mechanical Refining and Resin Content. 2014
Influence of Resin Molecular Weight on Curing and Thermal Degradation of Plywood Made From Phenolic Prepreg Palm Veneers 2014
Influence of Planting Density on the Fiber Morphology and Chemical Composition of a New Latex-timber Clone Tree of Rubberwood (Hevea brasiliensis Muell.Arg.) 2014
Kenaf bast cellulosic fibers hierarchy: A comprehensive approach from micro to nano 2014
Measurement of mechanical and physical properties of particleboard by hybridization of kenaf with rubberwood particles 2014
The Effect of Additives on Bending Strenght of Pultruded Hybrid Reinforced Resol Type Phenolic Composite 2014
EFFECTS OF PROCESSING FACTORS AND POLYMER RETENTION ON THE PERFORMANCE OF PHENOLICTREATED WOOD 2014
Cellulosic Nanomaterials for Sensing Applications 2014
Effect of Resin Content and Pressure on the Performance Properties of Rubberwood-kenaf Composite Board Panel 2014
Effects of fiber treatment on morphology, tensile and thermogravimetric analysis of oil palm empty fruit bunches fibers 2013
A Jatropha biomass as renewable materials for biocomposites and its applications 2013
A Study on the Effects of Environment on Curing Characteristics of Thixotropic and Room Temperature Cured Epoxy-based Adhesives Using DMTA 2013
Effect of Fiber Treatment on Dimensional Stability and Chemical Resistance Properties of Hybrid Composites 2013
Effect of fiber extraction methods on some properties of kenaf bast fiber 2013
Dynamic Mechanical Properties of Activated CarbonFilled Epoxy Nanocomposites 2013
Isolation and Characterization of Cellulose Whiskers from Kenaf (Hibiscus cannabinus L.) Bast Fibers 2013
Effect of pretreatment process on bioconversion of kenaf (hibiscus cannabinus l.) core to glucose 2013
Evaluation of Some Physical Properties for Oil Palm as Alternative Biomas Resources. Wood Material Science and Engineering 2013
Development a new method for pilot scale production of high grade oil palm plywood: Effect of resin content on the mechanical properties, bonding quality and formaldehyde emission of palm plywood 2013
Evaluation of Selected Physical and Mechanical Properties of Multiple Leader Acacia crassicarpa A. Cunn. Ex. Benth. Genotypes 2013
Development a new method for pilot scale production of high grade oil palm plywood: Effect of hot-pressing time 2013
Effects of Temperature and Time on the Morphology, pH, and Buffering Capacity of Bast and Core Kenaf Fibres 2013
Cytotoxic Activity Of Kenaf Seed Oils From Supercritical Carbon Dioxide Fluid Extraction Towards Human Colorectal Cancer (Ht29) Cell Lines 2013
Study on the Longitudinal Permeability of Oil Palm Wood 2013
Tensile Strength Characteristics of LVL Based on Full Scale Testing 2013
Failure Characteristics of LVL in Flatwise Bending 2013
Physical and thermal properties of microwave-dried wood lumber impregnated with phenol formaldehyde resin 2013
Properties of Resin Impregnated Oil Palm Wood (Elaeis Guineensis Jack) 2013
Bamboo Now is Stronger Than Ever 2013
Bending Performance of LVL Manufactured from Malaysian Tropical Timbers 2013
Assessing MOE of LVL Using Non-Destructive Technique (Vibration Method) 2013
Properties of Some Thermally Modified Wood Species 2013
Properties of medium density fibreboard (MDF) from kenaf (Hibiscus cannabinus L.) core as function of refining conditions 2013
Relationship Between Bending Shear and Glue Bond Shear in LVL 2013
Optimization of torrefaction conditions for high energy density solid biofuel from oil palm biomass and fast growing species available in Malaysia 2013
Oil Palm Wood: Its Potential, Properties and Quality Enhancement 2013
Strength and Failure Characteristics of LVL in Compression 2013
Laminated Veneer Lumber (LVL): A New Addition to the Malaysian Plywood Industry 2013
Nanoparticles Filled Epoxy-based Adhesive for in Situ Timber Bonding 2013
Tensile, Electrical Conductivity and Morphological Properties of Carbon Black-Filled Epoxy Composites 2013
Shear Modulus of LVL Based on Bending Shear Test 2013
Properties of medium-density fibreboard (MDF) made from treated empty fruit bunch of oil palm 2013
Kenaf seed oil from supercritical carbon dioxide fluid extraction inhibits the proliferation of WEHI-3B leukemia cells in vivo 2012
Properties of particleboard made from kenaf (Hibiscus cannabinus L.) as function of particle geometry 2012
Properties of three-layer particleboards made from kenaf (Hibiscus cannabinus L.) and rubberwood (Hevea brasiliensis) 2012
Optimisation of the processing variables for high polymer loading in compressed wood using response surface mathodogy 2012
Influence of Thermo Mechanical Pulping Production Parameters on Properties of Medium Density Fibreboard Made from Kenaf Bast 2012
Effects of age and height on selected propertieses of Malaysian Bamboo (Gigantochloa levis ) 2012
Mechanical and Dimensional Stability Properties of Medium-Density Fibreboard Produced from Treated Oil Palm Empty Fruit Bunch 2012
A new method of pilot scale production high grade oil palm plywood: Effect of pressing pressure 2012
Characteristics of Nanofiber Extracted from Kenaf Bast 2012
Optimisation of The Process Parameters Affecting Properties of Compreg Wood Using Response Surface Methodology (RSM) 2012
Development of High Performance Oil Palm Stem Plywood 2012
Adhesion Characteristics of Phenol Formaldehyde Pre-Preg Oil Palm Stem Veneers 2012
Some properties of chemically modified Sesenduk (Endspermum malacacense) wood exposed to weathering 2012
Adhesion and bonding properties of low molecular weight phenol formaldehyde-treated plybamboo 2012
Addition of urea as formaldehyde scavenger for Low molecular weight phenol formaldehyde treated compreg wood 2012
Accelerated and Outdoor Ageings of Laminated Veneer Lumber and Their Correlations with Strength and Stiffness 2012
Properties of Particleboard Manufactured from Kenaf as Function of Particle Geometry and Aspect Ratio 2012
Isolation and characterization of cellulosic nanofiber from kenaf bast 2012
Oil Palm Biomass Fibres and Recent Advancement in Oil Palm Biomass Fibres Based Hybrid Biocomposites 2012
Mechanical Properties of Pultruded Kenaf Hybrid/glass fibre Reinforced Novalac Type Phenolic Composite for Non-Structural Application 2012
Evaluation of Oil Palm Stems Wood Extractives in Non-Successive and Successive Extractions 2012
Pre-Drying Treatment of Oil Palm Veneers 2012
Effect of Oil Palm Empty Fruit Bunch (EFB) Treatments on Residual Oil Content and Properties on Exterior Medium Density Fibreboard (MDF) 2012
Creep Behavior of Epoxy-Based Adhesive Reinforced with Nanoparticles for Bonded-In Timber Connection 2012
Effect of Medium Composition on Pectinase Production by Locally Isolated Strain from Kenaf Stem 2012
Kenaf - A Potential Fibre for Pulp and Paper Manufacture 2012
Laminated Veneer Lumber From Malaysian Tropical Timber 2012
Isolation of Novel Native Lignocellulolytic Fungi for Biological Pretreatment of Lignocellulose Biomass Materials 2012
Properties of medium density Fibreboard (MDF) from Kenaf (Hibiscus cannabinus L.) core as affected by different refining conditions 2012
Development of a new pilot scale production of high grade oil palm plywood: Effect of pressing pressure 2012
Nanotechnology in Pulp and Paper Industries: A Review 2011
Surface Plasmon Resonance Sensing Detection of Mercury and Lead Ions Based on Conducting Polymer Composite 2011
Properties of Cellulose Nanofibers Isolated from Kenaf (Hibiscus cannabinus L.) Fibers 2011
Retting Process of Some Bast Plant Fibres and Its Effect on Fibre Quality: A Review 2011
Kenaf seed oil from supercritical carbon dioxide fluid extraction induced G1 phase cell cycle arrest and apoptosis in leukemia cells 2011
Viable Biofibres for Future 2011
Physicochemical characterization of pulp and nanofibers from kenaf stem 2011
Production of glucose from oil palm trunk and sawdust of rubberwood and mixed hardwood 2011
Utilisation of Oil Palm Biomass 2011
Effects of treatment with low molecular weight phenol formaldehyde resin on the surface characteristics of oil palm (Elaeis quineensis) stem veneer 2011
Current Status of Oil Palm Industry in Malaysia 2011
Density and humidity gradients in veneers of oil palm stems 2011
Density Distribution of Oil Palm Stem Veneer and Its Influence on Plywood Mechanical Properties 2011
Enhancing the Properties of Low Density Hardwood Dyera costulata Through Impregnation with Phenolic Resin Admixed with Formaldehyde Scavenger 2011
Effect of kenaf seed oil from different ways of extraction towards ovarian cancer cells. 2011
Biological Durability of Injection Moulded Wood Plastic Composite Boards 2011
Efficient Bioretting of Kenaf by Aspergillus spp. 2011
Distribution of Oil Palm Starch for Different Level and portions of Oil Palm Trunk 2011
ISOLATION OF CELLULOLYTIC ENZYME PRODUCER FROM KENAF STEM AND AN EVALUATION OF KENAF BIORETTING PROCESS 2011
A new source of natural adhesive: Acacia mangium bark extracts co-polymerized with phenol-formaldehyde (PF) for bonding Mempisang (Annonaceae spp.) veneers 2011
Resistance of phenolic-treated oil palm stem plywood against subterranean termites and white rot decay 2011
Kenaf seed oil from supercritical carbon dioxide fluid extraction shows cytotoxic effects towards various cancer cell lines 2011
Production of Lactic Acid (LA) from Pretreated Kenaf Core V36 Material 2011
Compreg Laminates From Low Density Tropical Hardwoods 2010
A Review of Literatures Related of Using Kenaf for Pulp Production (Beating, Fractionation, and Recycled Fiber) 2010
Soda-anthraquinone pulp from Malaysian cultivated kenaf for linerboard production 2010
Fungal Modification of Kenaf Chips Using Coriolus versicolor, Pycnoporous sanguineus, ans Phanerochaete chrysosporium. 2010
Characterization of Acacia mangium polyflavonoid tannins by MALDI-TOF mass spectrometry and CP-MAS 13C NMR 2010
Evaluation Linerboard Properties from Malaysian Cultivated Kenaf Soda-Anthraquinone Pulp Versus Commercial Pulps 2010
Timber Industrialised Building System (IBS) Design Guide 2010
Acacia mangium Tannin as Formaldehyde Scavenger for Low Molecular Weight Phenol-Formaldehyde Resin in Bonding Tropical Plywood 2010
Timber Industrialised Building Systems (IBS) Design Guide 2010
Liquefaction of kenaf (Hibiscus cannabinus L.) core for wood laminating adhesive 2010
Mechanical and Physical Properties of Particleboard Made From 4-Year Old RRIM 2000 Series Clone Rubberwood 2010
New Approach to Use of Kenaf for Paper and Paperboard Production 2010
Optimization study of ethanolic fermentation from oil palm trunk, rubberwood and mixed hardwood hydrolysates using Saccharomyces cerevisiae 2010
Properties Enhancement of Oil Palm Plywood through Veneer Pretreatment with Low Molecular Weight Phenol-Formaldehyde Resin 2010
Bending Properties of Laminated Veneer Lumber Produced from Keruing (Dipterocarpus sp.) Reinforced with Low Density Wood Species 2010
Bonding properties and performance of multi-layered kenaf board 2009
Enhancing the Performance of Oil Palm Stem Plywood via Treatment with Low Molecular Weight Phenol Formaldehyde 2009
KENAF - A JOURNEY TOWARDS ENERGIZING THE BIOCOMPOSITE INDUSTRY IN MALAYSIA 2009
LOW DENSITY PARTICLEBOARD MANUFACTURED FROM KENAF AND RUBBERWOOD BLEND 2009
Anatomical Structures and Fiber Morphology of New Kenaf Varieties 2009
Three layer particleboard from kenaf (Hibiscus cannabinus L.) 2009
Modification of Plybamboo Through Resin Impregnation 2009
UTILIZATION OF KENAF (Hibiscus cannabinus L.) AND RUBBERWOOD (Hevea brasiliensis) BLENDS IN PARTICLEBOARD MANUFACTURE 2009
KENAF: BIOCOMPOSITES, DERIVATIES & ECONOMICS 2009
EFFECTS OF PHYSICAL AND CHEMICAL PRE-TREATMENTS ON FERMENTABLE SUGAR PRODUCTION OF KENAF CORE 2009
Effect of Curring Time on Physical and Mechanical Properties Phenolic-Treated Bamboo Strips. 2009
Effect of Ratio of Face to Core Particles on Mechanical and Physical Properties of Particleboard Manufactured from Ethiopian Highland Bamboo 2009
ANATOMICAL STRUCTURES, FIBER MORPHOLOGY AND CHEMICAL CONSTITUENTS OF DIFFERENT KENAF VARIETIES 2009
ANATOMTCAL STRUCTURES, FIBER MORPHOLOGY AND CHEMICAL CONSTITUENTS OF DIFFERENT KENAF VARIETIES 2009
Bonding of Oil Palm Stem Veneers with Low Molecular Weight Phenolic Resin 2009
CARBOXYMETHYLATION OF KENAF CORE 2009
Treatment of veneer with Low Molecular Weight Phenol Formaldehyde Resin to ehance dimensional stability and biological properties of oil palm stem plywood 2009
Oil Palm Waste for The Production of Bio-ethanol 2009
Bonding of oil palm fiber biomass for wood-based panels industry 2008
Production of Polyurethane from Liquified kenaf (Hibiscus cannabinus L.) Core for Wood Laminating Adhesive 2008
Process optimisation in the manufacturing of plywood from oil palm trunk 2008
The Effect of Petreament in Enzymatic Conversion of Kenaf Core Material into Fermentable Sugar 2008
Properties Enhancement of Oil-Palm Wood Through Modified Compreg Method: A Comprehensive Solution to Oil Palm Wood's Properties Flaws 2008
The properties of Low Density Particleboard Manufactured from Kenaf and Rubberwood Blend 2008
Properties of Medium Density Fibreboard (MDF) Admixture Rubberwood RRIM 2020 Clone Fibres and Oil Palm Empty Fruit Bunch (EFB) Fibres Blends. 2008
Properties of pyrethroids-treated particleboards manufactured from rubberwood and oil palm empty fruit bunches (EFB). 2008
Evaluation of surface quality of some Malaysia species as function of outdoor expose 2008
Basic Properties of Kenaf (Hibiscus cannabinus L.) Varieties V36 Fibre Harvested at Various Age 2008
Bonding properties and dimensional stability of 5-ply phenolic-treated plybamboo 2008
Carboxymethylated Kenaf Core 2008
Eficacy of Pyrethroid and Boron Preservatives in Protecting Particleboards against Fungus and Termite 2008
Efficacy of pyrethroid and boron preservatives in protecting particleboards against fungus and termite 2008
Development of Particleboard from Kenaf (Hibiscus cannabinus L.) and Rubberwood (Hevea brasiliensis) Blend 2008
Impregnation and drying process of treated bamboo strips with low molecular weight phenol formaldehyde (LMwPF) resin 2008
Effect of Pressing Time on Physical and Mechanical Properties of Phenolic Impregnated Strips 2007
Impregnation of bamboo (Gigantochloa scortechinii) stiprs with low-molecular-weight phenol formaldehyde resin 2007
Impregnation of Bamboo Strips with Low Molecular Weight Phenol Formaldehyde Resin: Impregnation and Drying Process 2007
Pretreatment of Veneer with Low Molecular Weight Phenol Formaldehide Resin to Enhance the Properties of Plywood From Oil Palm Wood 2007
Utilisation of non-conventional tropical lignocellulosic resources for the hardboard production. 2007
Impregnated of Bamboo (Gigantochloa scortechinii) Strips with Low-Molecular Weigh Phenolic Fenol Formaldehyde 2007
Properties Enhancement of Oil Palm Lumber through the Modified Compreg Method 2007
Properties Enhancement of Oil-Palm Wood Through Modified Compreg Method: A Comprehensive Solution to Oil Palm Woods Properties Flaws 2007
Effect of pressing time on bonding properties and dimensional stability of phenolic-treated plybamboo 2007
Effect of Pressing Time on the Bonding Properties and Dimensional Stability of Phenolic-Treated Plybambo 2007
Synthesis and Evaluation of low molecular weight phenol formaldehyde resin for the production of high dimensionally stable oriented strand board 2007

 


2338 HITS
sejak 31 Mac'08



Universiti Putra Malaysia, 43400 UPM SERDANG, Selangor | T: 03-8946 6000 |  Hak Cipta Terpelihara UPM 2007
versi 1.01 beta
© UNIVERSITI PUTRA MALAYSIA, 2008
template oleh zuraya