A
PROFILE
UPM's Staff Profile
PROF. MADYA DR. DAYANG LAILA BINTI ABANG HAJI ABDUL MAJID
ASSOCIATE PROFESSOR
FACULTY OF ENGINEERING
dlaila@upm.edu.my
UPM WEBSITE
PROFILE
dlaila
BM
EN

PROFESSIONAL

NAME :
(Prof. Madya Dr.) DAYANG LAILA BINTI ABANG HAJI ABDUL MAJID
POST :
ASSOCIATE PROFESSOR
ENTITY :
FACULTY OF ENGINEERING

FIELD OF SUPERVISION
ADVANCED MATERIALS / AEROSPACE ENGINEERING / BIOCOMPOSITE TECHNOLOGY AND DESIGN / MATERIALS ENGINEERING / MECHANICAL ENGINEERING
EDUCATION
PHD
UNIVERSITI PUTRA MALAYSIA, SERDANG, SELANGOR
Graduated : 2008
MASTER (AEROSPACE ENGINEERING)
UNIVERSITI PUTRA MALAYSIA, SERDANG, SELANGOR
Graduated : 2001
BACELOR (KEJURUTERAAN MEKANIKAL)
UNIVERSITI KEBANGSAAN MALAYSIA, BANGI, SELANGOR
Graduated : 1994
BOOK PUBLICATION
JOURNAL PUBLICATION
1. Effect of Fiber Orientation on the Structural Response of a Smart Composite Structure
    Journal type: Citation-Indexed - Scopus
2. Biocomposite from Acrylonitrile-Butadiene-Styrene Polymer and Kenaf Whole stem: mechanical properties
    Journal type: Citation-Indexed - Scopus
3. Dynamic analysis of a cantilevered woven composite plate-like wing
    Journal type: Citation-Indexed - Scopus
4. Operational modal testing of cantilevered composite plate in subsonic flow
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
5. Mould design and manufacturing considerations of honeycomb biocomposites with transverse fibre direction for aerospace application
    Journal type: Citation-Indexed - Scopus
6. Preliminary Review of Biocomposites Materials for Aircraft Radome Application
    Journal type: Citation-Indexed - Scopus
7. Flutter analysis of a hybrid plate-like fiber reinforced composite wing
    Journal type: Citation-Indexed - Scopus
8. LCO flutter of cantilevered woven glass/epoxy laminate in subsonic flow
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
9. Cotton reinforced biopolymer matrix composite: Effect of ultraviolet on its mechanical properties
    Journal type: Citation-Indexed - Scopus
10. Identification of Modal Properties of Composite Thin Plate Using OMA in Wind Tunnel Environment
    Journal type: Citation-Indexed - Scopus
11. GLASS/EPOXY WOVEN COMPOSITE LAMINATE DESIGN BASED ON NONLINEAR RESULTS
    Journal type: Citation-Indexed - Scopus
12. Quasi static analysis of a biocomposite aircraft radome
    Journal type: Citation-Indexed - Scopus
13. A comparative study of an aircraft radome closed mold through vacuum infusion technique
    Journal type: Citation-Indexed - Scopus
14. Flammability of self-extinguishing kenaf/ABS nanoclays composite for aircraft secondary structure
    Journal type: Citation-Indexed - Scopus
15. Shape memory alloy actuation effect on subsonic static aeroelastic deformation of composite cantilever plate
    Journal type: Citation-Indexed - Scopus
16. Tensile Properties of woven carbon/kevlar reinforced epoxy hybrid composite
    Journal type: Citation-Indexed - Scopus
17. A brief research review for improvement methods the wettability between ceramic reinforcement particulate and aluminium matrix composites
    Journal type: Citation-Indexed - Scopus
18. Microstructural characterization of fly ash particulate reinforced AA6063 aluminium alloy for aerospace applications
    Journal type: Citation-Indexed - Scopus
19. Effect of Equal Channel Angular Pressing on Yield Stress and Fatigue Properties of Al 6063 Alloy
    Journal type: Citation-Indexed - Scopus
20. Effect of low velocity impact damage on the natural frequency of composite plates
    Journal type: Citation-Indexed Journal - ERA
21. Vacuum infusion method for woven carbon/Kevlar reinforced hybrid composite
    Journal type: Citation-Indexed Journal - ERA
22. An auto lifting device to lift manhole cover with ergonomics consideration
    Journal type: Citation-Indexed - Scopus
23. Low-velocity impact performance of glass fiber, kenaf fiber, and hybrid glass/kenaf fiber reinforced epoxy composite laminates
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
24. Low Cycle fatigue of hybrid woven kenaf fiber reinforced epoxy composite with 1% addition of silica gel
    Journal type: Citation-Indexed - Scopus
25. Real-Time Strain Monitoring in Composites Using Flat Optical Fibre Sensors–Review Paper
    Journal type: Non Citation-Indexed
26. Artificial Intelligence for Sustainable Textiles: A Review of Circular Economy Applications
    Journal type: Non Citation-Indexed
27. Improving the stiffness of multilayer 3D woven composites by the integration of shape memory alloys (SMAs) into structures
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
28. Effect of fiber loading directions on the low cycle fatigue of intraply carbon- Kevlar reinforced epoxy hybrid composites
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
29. Embedded Sensors for In-Situ Strain Monitoring in Composite Struc- tures
    Journal type: Non Citation-Indexed
30. The influence of fly ash on the microstructure and mechanical properties AA6063 alloy using compocasting technique
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
31. Mathematical modeling and analysis of tribological properties of AA6063 aluminium reinforced with fly ash by using response surface methodology
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
32. Planar optical fibre sensor systems for real-time structural health monitoring of advanced composite structures
    Journal type: Non Citation-Indexed
33. EFFECTS OF VOLUME OF CARBON NANOTUBES ON THE ANGLED BALLISTIC IMPACT FOR CARBON KEVLAR HYBRID FABRICS
    Journal type: Citation-Indexed - Scopus
34. Research summary on the processing, mechanical and tribological properties of aluminium matrix composites as effected by fly ash reinforcement
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
35. Impacts of Volume of Carbon Nanotubes on Bending for Carbon- Kevlar Hybrid Fabrics
    Journal type: Citation-Indexed - Scopus
36. Flutter performance of shape memory alloy-embedded 3D woven flexible composite plate under subsonic flow
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
37. Tensile strength of reinforced laminates after oblique ballistic impact: An experimental study
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
38. Heating Techniques of Shape Memory Alloy (SMA) - A Review
    Journal type: Citation-Indexed - Scopus
39. A Comparative Study of Additively Manufactured Nickle Titanium (NiTi) Shape Memory Alloy (SMA)
    Journal type: Citation-Indexed - Scopus
40. Protecting car engines and controlling their temperature by using shape memory alloy as an automatic mechanical cooling sensor
    Journal type: Citation-Indexed Journal - ERA
41. THERMOMECHANICAL PERFORMANCE OF HELICAL SHAPE MEMORY ALLOY SPRINGS IMMERSED IN HEATED AND COOLED WATER SYSTEM
    Journal type: Citation-Indexed - Scopus
42. Fatigue Analysis of Woven Intraply Carbon/Kevlar Hybrid Composite Below Ambient Temperature
    Journal type: Citation-Indexed Journal - Science Citation Index (JCR)
43. COMPARATIVE STUDY OF ELECTRICALLY AND INDUCTIVELY ACTUATED SHAPE MEMORY ALLOY NITI WIRE USING TENSILE TESTING
    Journal type: Non Citation-Indexed
EDUCATIONAL BACKGROUND
1. BEng (Hons) in Mechanical and Materials Engineering. UKM 1994
2. MSc in Advanced Engineering Materials. UPM 2001
3. PhD in Aerospace Engineering. UPM Submission of thesis by Nov. 2007
WORKING EXPERIENCE
Guru Sandaran Julai-Nov 1994 SMK Pending, Kuching, Sarawak.
Guru Sandaran Dis 94–April 95 SMB St. Thomas, Kuching, Sarawak.
Jurutera Proses Mei 95-Feb 98 Komag USA (M) Sdn. (Sarawak Operations) Kuching,
Sarawak.
Pegawai Lindungan Radiasi (Radiation Protection Officer) Dis 95-Feb 98 Komag USA (M) Sdn. (Sarawak Operations) Kuching,
Sarawak.
Tutor Mac 98-Mei 2001 Jab. Kejuruteraan Aeroangkasa, Fakulti Kejuruteraan, UPM.
CONFERENCE / WORKSHOP / SEMINAR
Majid, D.L., Basri, S. and Zahari, R. Aeroelastic tailoring of woven glass/epoxy
laminate, WEC 2007.
Majid, D.L.A.A., Basri, S. and Harun, H. Experimental characterization and
aeroelasticity of cantilevered woven glass/epoxy laminate, Proceedings of AEROTECH
II-2007,20-21st June 2007.
Rafie, A.S.M, Basri, S., Attaran, A.H., Majid, D.L., Sultan, M.T.H. and Yidris, N.
Computational analysis for Eagle150B aircraft wing, Proceedings of AEROTECH II-
2007, 20-21st June 2007.
Rafie, A.S.M, Basri, S., Attaran, A.H., Majid, D.L., Yidris, N. and Sultan, M.T.H.
Experimental analysis for Eagle 150 Baircraft wing, Proceedings of AEROTECH II-
2007, 20-21stJune 2007.
A.S.Mohd Rafie, A.Attaran, D.L. Majid and S.Basri. Design and development of an
experimental aeroelastic test rig, Proceedings of 1st Regional Conference on Vehicle
Engineering & Technology(RIVET 06), 3-5 July, 2006.
Attaran, D.L. Majid, S. Basri and A.S. Mohd Rafie. Structural optimization of an
aeroelastically tailored composite flat plate made of woven fiberglass/epoxy,
Proceedings of 1st Regional Conference on Vehicle Engineering & Technology(RIVET
06), 3
ShahNor Basri, Renuganth Varatharajoo, Dayang LailaMajid, Abdul Aziz Jaafar
(Editors), Proceedings ofAEROTECH-2005. ISBN 983-42130-0-X, 2005.
D. L. Majid, S. Basri, E. Mahdi, A.S.M. Rafie and A.Attaran. Aeroelastic Tailoring of a
composite flat plate,Proceedings of AEROTECH 2005, ISBN 983-42130-0-X,67-71.
S.T. Taher, E. Mahdi, D.L. Majid and F.R. Ahmadun. Design and testing of composite
energy-absorbing keel beam for general aviation aircrafts. Proceedings ofAEROTECH
2005, ISBN 983-42130-0-X, 55-60.
Dayang Laila Majid, ShahNor Basri & Waqar Asrar, Preliminary Investigation of Low
speed Aeroelasiticity of Thin flat Plate, WEC ’99, Kuala Lumpur, Malaysia, 19 – 22July
1999.
AWARD AND ACHIEVEMENT
Gold Medal(antarabangsa)
54th World Exhibition of Innovation, Research and NewTechnologies, Brussels, 2005.
SpecialAchievementAward(antarabangsa)
Special Achievement Award from Federal Agency forIndustrial (ROSPROM) Russian
Federation; 54th WorldExhibition of Innovation, Research and NewTechnologies, Brussels,
2005.
Bronze medal(kebangsaan)
Elsadiq Mahdi Ahmed Saad, Siavash Talebi Taher,Dayang Laila Abang Abdul Majid,
Fakhrul-RaziAhmadun, “Composite Energy-absorbing keel beam forgeneral aviation
aircrafts”, 16th International InventionInnovation Industri
Bronze medal(universiti)
Dayang Laila Abang Abdul Majid, Ir. ShahNor Basri, Mohamad Saleem, El-Sadig Mahdi,
Mohd Azmin Shakraine, Abdul Hamid Attaran, “Design and optimization of a woven fiber-reinforced composite wing”, Pameran Penyelidikan Rek
Silver medal(universiti)
Elsadiq Mahdi Ahmed Saad, Siavash Talebi Taher,Dayang Laila Abang Abdul Majid,
Fakhrul-RaziAhmadun, “Design and testing of composite energyabsorbingkeel beam for
general aviation aircrafts”,Pameran Rekacipta, Penyelid
Bronze medal(fakulti)
Dayang Laila Abang Abdul Majid, Ir. ShahNor Basri,Mohamad Saleem, El-Sadig Mahdi,
Mohd AzminShakraine, Abdul Hamid Attaran, “Design andoptimization of a plate-like fiberreinforced
compositewing”, Pameran Penyelidikan Fak
AREA OF SPECIALISATION
ADVANCE ENGINEERING MATERIAL AND
AEROELASTICITY
RESEARCH PROJECT
Structural optimization of an aeroelastically tailored composite wing EAR IRPA(09-02-
04-0899EA001) 2004-2006 RM129,000
Characterisation of composite aircraft wing under aerodynamic loading, Skim Latihan
Pensyarah 2003-2004 RM10,000
Fretting fatigue characterization of 7075-T6, Ti-6Al-4V and BS L65 aerospace
aluminium alloys and its applications to aerospace industry. EAR IRPA (09-02-04-0446-
EA001) 2002, RM175,000
PUBLICATION
2024
Fatigue Analysis of Woven Intraply Carbon/Kevlar Hybrid Composite Below Ambient Temperature
2023
Thermomechanical Performance of Shape Memory Alloy Spring by Homogeneous Distribution of Temperature
2023
Protecting car engines and controlling their temperature by using shape memory alloy as an automatic mechanical cooling sensor
2023
Superelasticity Behaviour of NiTi Actuator at Different Strain Rates
2023
Vibrational Characteristics of Shape Memory Alloy?Embedded 3D Woven Composite Plate
2022
THERMOMECHANICAL PERFORMANCE OF HELICAL SHAPE MEMORY ALLOY SPRINGS IMMERSED IN HEATED AND COOLED WATER SYSTEM
2022
Heating Techniques of Shape Memory Alloy (SMA) - A Review
2022
Tensile strength of reinforced laminates after oblique ballistic impact: An experimental study
2022
Flutter performance of shape memory alloy-embedded 3D woven flexible composite plate under subsonic flow
2021
Impacts of Volume of Carbon Nanotubes on Bending for Carbon- Kevlar Hybrid Fabrics
2021
Research summary on the processing, mechanical and tribological properties of aluminium matrix composites as effected by fly ash reinforcement
2020
Tensile behavior of multilayer 3D smart woven composites embedded with shape memory alloy (SMA) wires
2020
EFFECTS OF VOLUME OF CARBON NANOTUBES ON THE ANGLED BALLISTIC IMPACT FOR CARBON KEVLAR HYBRID FABRICS
2020
Mathematical modeling and analysis of tribological properties of AA6063 aluminium reinforced with fly ash by using response surface methodology
2019
Effect of fiber loading directions on the low cycle fatigue of intraply carbon- Kevlar reinforced epoxy hybrid composites
2019
The influence of fly ash on the microstructure and mechanical properties AA6063 alloy using compocasting technique
2019
Improving the stiffness of multilayer 3D woven composites by the integration of shape memory alloys (SMAs) into structures
2018
Low Cycle fatigue of hybrid woven kenaf fiber reinforced epoxy composite with 1% addition of silica gel
2018
Low-velocity impact performance of glass fiber, kenaf fiber, and hybrid glass/kenaf fiber reinforced epoxy composite laminates
2017
Effect of Equal Channel Angular Pressing on Yield Stress and Fatigue Properties of Al 6063 Alloy
2017
Tensile Properties of woven carbon/kevlar reinforced epoxy hybrid composite
2017
Effect of fly ash addition on the physical and mechanical properties of AA6063 alloy reinforcement
2016
Shape memory alloy actuation effect on subsonic static aeroelastic deformation of composite cantilever plate
2015
GLASS/EPOXY WOVEN COMPOSITE LAMINATE DESIGN BASED ON NONLINEAR RESULTS
2014
Operational modal testing of cantilevered composite plate in subsonic flow
2014
Quasi static analysis of a biocomposite aircraft radome
2013
Identification of Modal Properties of Composite Thin Plate Using OMA in Wind Tunnel Environment
2012
Effect of fiber orientation on the structural response of a smart composite structure
2012
Effect of Fiber Orientation on the Structural Response of a Smart Composite Structure
2012
Dynamic analysis of a cantilevered woven composite plate-like wing
2012
A comparative study of an aircraft radome closed mold through vacuum infusion technique
2011
Cotton reinforced biopolymer matrix composite: Effect of ultraviolet on its mechanical properties
2011
Preliminary reviewl of biocomposites for aircraft radome application
2011
Flutter analysis of a hybrid plate-like fiber reinforced composite wing
2011
Preliminary Review of Biocomposites Materials for Aircraft Radome Application
2008
LCO flutter of cantilevered woven glass/epoxy laminate in subsonic flow